PCF8575
- I2C to Parallel-Port Expander
- Open-Drain Interrupt Output
- Low Standby-Current Consumption of 10 µA Max
- Compatible With Most Microcontrollers
- 400-kHz Fast I2C Bus
- Address by Three Hardware Address Pins for Use of up to Eight Devices
- Latched Outputs With High-Current Drive Capability for Directly Driving LEDs
- Current Source to VCC for Actively Driving a High at the Output
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model
- 200-V Machine Model
- 1000-V Charged-Device Model
This 16-bit I/O expander for the two-line bidirectional bus (I2C) is designed for 2.5-V to 5.5-V VCC operation.
The PCF8575 device provides general-purpose remote I/O expansion for most microcontroller families by way of the I2C interface [serial clock (SCL), serial data (SDA)].
The device features a 16-bit quasi-bidirectional input/output (I/O) port (P07–P00, P17–P10), including latched outputs with high-current drive capability for directly driving LEDs. Each quasi-bidirectional I/O can be used as an input or output without the use of a data-direction control signal. At power on, the I/Os are high. In this mode, only a current source to VCC is active.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | PCF8575 Remote16-BIT I2C AND SMBus I/O Expander with Interrupt Output datasheet (Rev. H) | PDF | HTML | 2020/02/05 |
Application note | I2C Dynamic Addressing | 2019/04/25 | ||
Application note | Choosing the Correct I2C Device for New Designs | PDF | HTML | 2016/09/07 | |
Application note | Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) | 2015/12/02 | ||
Application note | Understanding the I2C Bus | PDF | HTML | 2015/06/30 | |
Application note | Maximum Clock Frequency of I2C Bus Using Repeaters | 2015/05/15 | ||
Application note | I2C Bus Pull-Up Resistor Calculation | PDF | HTML | 2015/02/13 | |
Application note | Programming Fun Lights With TI's TCA6507 | 2007/11/30 | ||
More literature | PCF8574 and PCF8574A Application Clip | 2004/08/18 | ||
More literature | I2C Application Clip | 2004/07/19 | ||
Application note | Semiconductor Packing Material Electrostatic Discharge (ESD) Protection | 2004/07/08 | ||
More literature | I2C and Serial Bus Devices Application Clip | 2003/07/10 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
패키지 | 핀 | 다운로드 |
---|---|---|
SOIC (DW) | 24 | 옵션 보기 |
SSOP (DB) | 24 | 옵션 보기 |
SSOP (DBQ) | 24 | 옵션 보기 |
TSSOP (PW) | 24 | 옵션 보기 |
TVSOP (DGV) | 24 | 옵션 보기 |
VQFN (RGE) | 24 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.