제품 상세 정보

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 48 Rating Catalog ADC SNR (typ) (dB) 94 DAC SNR (typ) (dB) 98 Operating temperature range (°C) to
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 48 Rating Catalog ADC SNR (typ) (dB) 94 DAC SNR (typ) (dB) 98 Operating temperature range (°C) to
SSOP (DB) 28 79.56 mm² 10.2 x 7.8
  • Monolithic 18-Bit ADC and DAC
  • 16- or 18-Bit Input/Output Data
  • Accepts Seven Alternate Formats
  • Stereo ADC:
    • Single-Ended Voltage Input
    • 64× Oversampling Digital Filter
      • Pass-Band Ripple: ±0.05 dB
      • Stop-Band Attenuation: –65 dB
    • High Performance:
      • THD+N: –88 dB
      • SNR: 94 dB
      • Dynamic Range: 94 dB
    • Digital High-Pass Filter
  • Stereo DAC
    • Single-Ended Voltage Outut
    • Analog Low-Pass Filter
    • 8× Oversampling Digital Filter
      • Pass-Band Ripple: ±0.17 dB
      • Stop-Band Attenuation: 35 dB
    • High Performance:
      • THD+N: –90 dB
      • SNR: 98 dB
      • Dynamic Range: 97 dB
    • Special Features (PCM3000)
      • Digital De-Emphasis
      • Digital Attenuation (256 Steps)
      • Soft Mute
      • Digital Loopback
    • Sample Rate: 4 kHz to 48 kHz
    • System Clock: 256 fs, 384 fs, 512 fs
    • Single 5-V Power Supply
    • Small Package: SSOP-28
    • APPLICATIONS
      • Sampling Keyboards
      • Digital Mixers
      • Mini-Disk Recorders
      • Hard-Disk Recorders
      • Karaoke Systems
      • DSP-Based Car Stereo
      • DAT Recorders
      • Video Conferencing

System Two, Audio Precision are trademarks of Audio Precision, Inc.
All other trademarks are the property of their respective owners.

  • Monolithic 18-Bit ADC and DAC
  • 16- or 18-Bit Input/Output Data
  • Accepts Seven Alternate Formats
  • Stereo ADC:
    • Single-Ended Voltage Input
    • 64× Oversampling Digital Filter
      • Pass-Band Ripple: ±0.05 dB
      • Stop-Band Attenuation: –65 dB
    • High Performance:
      • THD+N: –88 dB
      • SNR: 94 dB
      • Dynamic Range: 94 dB
    • Digital High-Pass Filter
  • Stereo DAC
    • Single-Ended Voltage Outut
    • Analog Low-Pass Filter
    • 8× Oversampling Digital Filter
      • Pass-Band Ripple: ±0.17 dB
      • Stop-Band Attenuation: 35 dB
    • High Performance:
      • THD+N: –90 dB
      • SNR: 98 dB
      • Dynamic Range: 97 dB
    • Special Features (PCM3000)
      • Digital De-Emphasis
      • Digital Attenuation (256 Steps)
      • Soft Mute
      • Digital Loopback
    • Sample Rate: 4 kHz to 48 kHz
    • System Clock: 256 fs, 384 fs, 512 fs
    • Single 5-V Power Supply
    • Small Package: SSOP-28
    • APPLICATIONS
      • Sampling Keyboards
      • Digital Mixers
      • Mini-Disk Recorders
      • Hard-Disk Recorders
      • Karaoke Systems
      • DSP-Based Car Stereo
      • DAT Recorders
      • Video Conferencing

System Two, Audio Precision are trademarks of Audio Precision, Inc.
All other trademarks are the property of their respective owners.

The PCM3000/3001 is a low-cost, single-chip stereo audio codec (analog-to-digital and digital-to-analog converter) with single-ended analog voltage input and output. Both ADCs and DACs employ delta-sigma modu- lation with 64-times oversampling. The ADCs include a digital decimation filter and the DACs include an 8-times oversampling digital interpolation filter. TheDACs also include digital attenuation, de-emphasis, infinite zero detection and soft mute to form a complete subsystem. The PCM3000/3001 operates with left-justified, right-justified, I2S or DSP data formats.

The PCM3000 can be programmed with a three-wire serial interface for special features and data formats. The PCM3001 can be pin-programmed for data formats.

The PCM3000 and PCM3001 are fabricated using a highly advanced CMOS process and are available in a small 28-pin SSOP package. The PCM3000/3001 are suitable for a wide variety of cost-sensitive consumer applications where good performance is required.

The PCM3000/3001 is a low-cost, single-chip stereo audio codec (analog-to-digital and digital-to-analog converter) with single-ended analog voltage input and output. Both ADCs and DACs employ delta-sigma modu- lation with 64-times oversampling. The ADCs include a digital decimation filter and the DACs include an 8-times oversampling digital interpolation filter. TheDACs also include digital attenuation, de-emphasis, infinite zero detection and soft mute to form a complete subsystem. The PCM3000/3001 operates with left-justified, right-justified, I2S or DSP data formats.

The PCM3000 can be programmed with a three-wire serial interface for special features and data formats. The PCM3001 can be pin-programmed for data formats.

The PCM3000 and PCM3001 are fabricated using a highly advanced CMOS process and are available in a small 28-pin SSOP package. The PCM3000/3001 are suitable for a wide variety of cost-sensitive consumer applications where good performance is required.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
PCM3070 활성 임베디드 miniDSP를 갖춘 스테레오 오디오 코덱 miniDSP, headphone driver, higher sampling rate, higher SNR of 100/93dB (ADC/DAC), SPI & I2C controlled

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기2
유형 직함 날짜
* Data sheet PCM3000, PCM3001: 18-Bit Stereo Audio Codec, Single-Ended Analog Input/Output datasheet (Rev. A) 2004/10/28
User guide DEM-PCM3000: Demonstration Fixture for the PCM3000 and PCM3001 2000/09/27

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 다운로드
SSOP (DB) 28 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상