TAC5211
- ADC channel
- Mono high performance ADC
- Performance:
- Line differential input dynamic range: 118 dB
- Mic differential input dynamic range: 118 dB
- THD+N: –95 dB
- Input voltage:
- Differential, 2-VRMS full-scale inputs
- Single-ended, 1-VRMS full-scale inputs
- Input mix / mux options
- Sample rate (fS) = 8 kHz to 768 kHz
- Programmable microphone bias (Up to 3V)
- DAC channel
- Mono high performance DAC
- DAC performance:
- DAC to line out dynamic range: 119 dB
- DAC to HP out dynamic range: 115 dB
- THD+N: –95 dB
- Head phone / line Out output voltage:
- Differential, 2-VRMS full-scale
- Single-ended, 1-VRMS full-scale
- DAC sample Rates (fs) = 8 KHz to 768 KHz
- Common features
- Up to 4 record channels
- 1 Channel analog + 3 channel digital
- 4 Channel digital
- Analog input to output by-pass
- Voice activity detection
- Battery protection
- Signal distortion limiter
- Thermal foldback
- Low latency filter selection
- Programmable HPF and biquad filters
- I2C & SPI control interface
- Audio serial interface
- Format: TDM, I2S or left justified
- Word length: 16,20,24 or 32 bits
- Programmable PLL for flexible clocking
- Low power modes
- TBD mW for playback
- TBD mW for record
- Single supply operation: 1.8 V or 3.3 V
- I/O supply operation: 1.2 V or 1.8 V or 3.3 V
- Temperature grade 1: –40°C ≤ TA ≤ +125°C
- Up to 4 record channels
The TAC5211 is a high performance Mono Codec with 2 VRMS differential Input, 118 dB Mono ADC and 2 VRMS Mono DAC. The TAC5211 supports both differential and Single-ended input and output. The device supports both Microphone and Line In input on the ADC Channel. DAC Output can be configured for either Line Out or Head Phone Load. TAC5211 can drive up to 62.5 mW into a Headphone Load. The TAC5211 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The TAC5211 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, makes TAC5211 an excellent choice for space-constrained audio applications.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TAC5211 High-performance mono audio codec with 118 dB dynamic range ADC and 119 dB dynamic range DAC datasheet | PDF | HTML | 2022/01/12 |
| Application note | Headset Detection for TAx52xx Family | PDF | HTML | 2024/04/11 | |
| Application note | TAx5x1x Synchronous Sample Rate Conversion | PDF | HTML | 2023/12/19 | |
| Application note | DAC Swings and Common Mode Settings in AC Coupled and DC Coupled DAC | PDF | HTML | 2023/11/10 | |
| Application note | Clocking Configuration of Device and Flexible Clocking For TAx5x1x Family | PDF | HTML | 2023/11/08 | |
| Application note | Clock Error Configuration, Detection, and Modes Supported in TAx5x1x Family | PDF | HTML | 2023/11/07 | |
| Application note | Analog Input Configurations, Mixing and Muxing of TAx5x1x Devices (Rev. A) | PDF | HTML | 2023/10/30 | |
| Application note | Using the Voice Activity Detector (VAD) in the TLV320ADCx120 and PCMx120-Q1 (Rev. A) | PDF | HTML | 2022/04/05 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TAC5212EVM-K — TAC5212 평가 모듈
PUREPATHCONSOLE — 오디오 시스템 설계 및 개발을 위한 PurePath™ 콘솔 그래픽 개발 제품군
PurePath Console’s (...)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGE) | 24 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.