TAS5548
- General Features
- 8ch Asynchronous Sample Rate Converter
- 8 Channel Audio Processing for 32-192 kHz
(ARSC to 96kHz) - 4 Channel Native Audio Processing at 192kHZ
- 30 kHz Audio Bandwidth for DTS-HD
Compatibility - Energy Manager for Overall System Power
Control - Power Supply Volume Control
- Audio Input or Output
- Up to Five Synchronous Serial Audio Inputs
(10 Channels) - Up to One Synchronous Serial Audio Outputs
(2 Channels) - I2S Master Mode When Used With External
Crystal - Slave Mode 32-192KHz With Auto/Manual
Sample Rate Detection - Eight Differential PWM Output That can
Support AD or BD Modulation - Two Differential PWM Headphone Outputs
- I2S Out for External Wireless Sub
- PWM Output Supports Single Ended (S.E.) or
Bridge Tied Load (BTL)
- Up to Five Synchronous Serial Audio Inputs
- Audio Processing
- Volume Control Range 18 dB to –127 dB
(Master and Eight Channel Volume) - Bass and Treble Tone Controls With ±18-dB
Range, Selectable Corner Frequencies - Configurable Loudness Compensation
- Two Dynamic Range Compressors With Two
Thresholds, Two Offsets, and Three Slopes - Seven Biquads Per Channel
- Volume Control Range 18 dB to –127 dB
- PWM Processing
- >105-dB Dynamic Range
- THD+N < 0.1% (0–40 kHz)
- 20-Hz–40-kHz, Flat Noise Floor for 32KHz –
192KHz - Flexible Automute Logic With Programmable
Threshold and Duration for Noise-Free
Operation - Power-Supply Volume Control (PSVC) in High-
Performance Applications - Adjustable Modulation Limit
The TAS5548 is an 8-channel Digital Pulse Width Modulator (PWM) with Digital Audio Processing and Sample Rate Converter that provides both advanced performance and a high level of system integration. TAS5548 is designed to support DTS-HD specification Blu-ray HTiB applications. The ASRC consists of two separate modules which handle 4 channels each. Therefore, it is possible to support up to two different input sampling rates.
Texas Instruments Power Stages are designed to work seamlessly with the TAS5548. The TAS5548 also provides a high-performance, differential output to drive an external, differential-input, analog headphone amplifier.
The TAS5548 supports AD, BD, and ternary modulation operating at a 384-kHz switching rate for 48-, 96-, and 192-kHz data. The external crystal used must be 12.288 MHz. The TAS5548 also features power-supply-volume-control (PSVC), which improves dynamic range at lower power level and can be used as part of a Class G power supply when used with closed-loop PWM input power stages.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TAS5548 8-Channel HD Compatible Audio Processor with ASRC and PWM Output datasheet (Rev. A) | PDF | HTML | 2015/04/24 |
| User guide | TAS5548-5558EVM User's Guide (Rev. B) | 2013/07/31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| HTSSOP (DCA) | 56 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.