TAS5613A
- Active Enabled Integrated Feedback Provides: (PurePath™ HD)
- Signal Bandwidth up to 80kHz for High Frequency Content From HD Sources
- Ultra Low 0.03% THD at 1W into 4Ω
- Flat THD at all Frequencies for Natural Sound
- 80dB PSRR (BTL, No Input Signal)
- >100dB (A Weighted) SNR
- Click and Pop Free Startup and Stop
- Pin compatible with TAS5630, TAS5615 and TAS5611
- Multiple Configurations Possible on the Same PCB:
- Mono Parallel Bridge Tied Load (PBTL)
- Stereo Bridge Tied Load (BTL)
- 2.1 Single Ended (SE) Stereo Pair and Bridge Tied Load Subwoofer
- Total Output Power at 10%THD+N
- 300W in Mono PBTL Configuration
- 150W per Channel in Stereo BTL Configuration
- Total Output Power in BTL Configuration at 1%THD+N
- 160W Stereo into 3Ω
- 125W Stereo into 4Ω
- 85W Stereo into 6Ω
- 65W Stereo into 8Ω
- >90% Efficient Power Stage With 60-mΩ Output MOSFETs
- Self-Protection Design (Including Undervoltage, Overtemperature, Clipping,
and Short Circuit Protection) With Error Reporting - EMI Compliant When Used With Recommended System Design
- Thermally Enhanced Package Options:
- PHD (64-pin QFP)
- DKD (44-pin PSOP3)
- APPLICATIONS
- Home Theater Systems
- AV Receivers
- DVD/Blu-ray Disk Receivers
- Mini Combo Systems
- Active Speakers and Subwoofers
All other trademarks are the property of their respective owners
All other trademarks are the property of their respective owners
The TAS5613A is a high-performance analog input Class D amplifier with integrated closed loop feedback technology (known as PurePath™ HD). It has the ability to drive up to 150 W.Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels Stereo into 4Ω speakers from a single 36V supply.
PurePath™ HD technology enables traditional AB-Amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class D amplifiers.
Unlike traditional Class-D amplifiers, the distortion curve only increases once the output levels move into clipping.
PurePath™ HD technology enables lower idle losses making the device even more efficient.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | 150W Stereo/300W Mono PurePath HD Analog-Input Power Stage. datasheet (Rev. B) | 2011/09/14 | |
| Application note | Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) | 2019/08/26 | ||
| Application note | AN-1849 An Audio Amplifier Power Supply Design (Rev. C) | 2019/06/27 | ||
| Application note | AN-1737 Managing EMI in Class D Audio Applications (Rev. A) | 2013/05/01 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| HTQFP (PHD) | 64 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치