TLV1872
- Wide supply range: 2.7V to 40V (±1.35V to ±20V)
- Single or split supplies operation
- "Floating" push-pull output with separate supplies
- Output supplies set the full output swing.
- Rail-to-rail input
- Power-on-reset (POR)
- 65ns propagation delay
- Low input offset voltage: 500µV
- Low supply current: 70µA per channel
- Temperature range: -40°C to +125°C
The TLV187x is a 40V high-speed comparator that offers rail-to-rail inputs with a push-pull output-stage. The TLV187x also has the ability to level shift via separate input and output supplies. These features coupled with 65ns propagation delay make this family well-suited for bipolar zero-cross detection, Class D audio amplifier systems or other applications where level translation and propagation delay symmetry is needed.
This device includes a Power-On Reset (POR) feature that makes sure the output is in a known state until the minimum supply voltage has been reached before the output responds to the inputs, thus preventing false outputs during system power-up and power-down.
The TLV187x has a push-pull output stage, making them an excellent choice for applications where symmetry between rising and falling output responses is desired. This device offers the ability to level translate for downstream devices at lower voltages due to the separate input and output supplies.
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TLV1871/2 40V High-Speed Comparator with Separate Input and Output Supplies datasheet | PDF | HTML | 2024/03/20 |
Product overview | Using High Voltage Comparators in Time Domain Reflectometry Systems | PDF | HTML | 2024/08/22 | |
Product overview | Optimizing High-Speed, High-Voltage Control Loops with Comparators | PDF | HTML | 2024/05/07 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TLV1872EVM — TLV1872 evaluation module
이 보드는 40V 듀얼 채널 TLV1872 콤퍼레이터를 평가하도록 설계된 평가 모듈입니다. EVM은 10핀 DGS 패키지를 10핀 DIP 풋프린트로 변환하여 프로토타이핑을 간소화하고 필요한 경우 회로를 더 쉽게 테스트하고 브레드보드 방식으로 만들 수 있습니다.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
VSSOP (DGS) | 10 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.