TPA2008D2
- 3 W Per Channel into 3-
Speakers (THD+N = 10%) - < 0.045% THD at 1.5 W, 1 kHz, 3- Load
- < 0.045% THD at 1.5 W, 1 kHz, 3-
- DC Volume Control With 2-dB Steps From –38 dB to 20 dB
- Filter Free Modulation Scheme Operates Without a Large and Expensive LC Output Filter
- Extremely Efficient Third Generation 5-V Class-D Technology
- Low Supply Current, 7 mA
- Low Shutdown Control, 1 µA
- Low Noise Floor, –80 dBV
- Maximum Efficiency into 3 , 78%
- Maximum Efficiency into 8 , 88%
- PSRR, –70 dB
- Integrated Depop Circuitry
- Operating Temperature Range, –40°C to 85°C
- Space-Saving, Surface Mount PowerPAD™ Package
- APPLICATIONS
- LCD Projectors
- LCD Monitors
- Powered Speakers
- Battery Operated and Space Constrained Systems
PowerPAD is a trademark of Texas Instruments.
The TPA2008D2 is a third generation 5-V class-D amplifier from Texas Instruments. Improvements to previous generation devices include: dc volume control, lower supply current, lower noise floor, higher efficiency, smaller packaging, and fewer external components. Most notably, a new filter-free class-D modulation technique allows the TPA2008D2 to directly drive the speakers, without needing a low-pass output filter consisting of two inductors and three capacitors per channel. Eliminating this output filter saves approximately 30% in system cost and 75% in PCB area.
The improvements and functionality make this device ideal for LCD projectors, LCD monitors, powered speakers, and other applications that demand more battery life, reduced board space, and functionality that surpasses currently available class-D devices.
A chip-level shutdown control limits total supply current to 1 µA, making the device ideal for battery-powered applications. Protection circuitry increases device reliability: thermal and short circuit. Undervoltage shutdown saves battery power for more essential devices when battery voltage drops to low levels.
The TPA2008D2 is available in a 24-pin TSSOP PowerPAD™ package.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPA2008D2: 3-W Stereo Class-D Audio Power Amplifier w/DC Vol Control datasheet (Rev. C) | 2004/05/20 | |
| Application note | Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) | 2019/08/26 | ||
| Application note | AN-1849 An Audio Amplifier Power Supply Design (Rev. C) | 2019/06/27 | ||
| Application note | AN-1737 Managing EMI in Class D Audio Applications (Rev. A) | 2013/05/01 | ||
| User guide | TPA2008D2EVM - User Guide (Rev. A) | 2004/05/14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| HTSSOP (PWP) | 24 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.