이 제품의 최신 버전이 있습니다
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPD3S713-Q1
- AEC-Q100 qualified for automotive applications:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Device HBM ESD classification level H2
- Device CDM ESD classification level C5
- Short-to-battery (up to 18 V) and short-to-ground protection on V BUS pin
- Short-to-battery (up to 18 V) and short-to-V BUS protection on DM_IN, DP_IN pins
- DP_IN, DM_IN and V BUS IEC 61000-4-2 rated
- ±8-kV contact and ±15-kV air discharge
- DP_IN, DM_IN and V BUS ISO 10605 (330 pF, 330 Ω) rated
- ±8-kV contact and ±15-kV air discharge
- High speed data switches (1230-MHz BW)
- 4.5-V to 5.5-V input operating range
- 50-mA to 600-mA adjustable current limit (±13.5% at 200 mA)
- Integrated 73-mΩ (typical) high-side MOSFET
- 500-mA maximum continuous output current
- V BUS cable compensation
- 20-pin QFN (3 mm × 4 mm) package
The TPD3S713x-Q1 is a single-chip solution for short-to-battery, short-circuit, and ESD protection for high-speed data and power lines in automotive USB hub, head unit, telematics, and media interface applications. The integrated data switches provide best-in-class bandwidth for minimal signal degradation during USB short-to-battery events. The high bandwidth of 1.2 GHz allows for a clean USB2.0 high-speed 480-Mbps eye diagram with the long captive cables that are common in the automotive USB environment.
The short-to-battery protection isolates the internal system circuits from any overvoltage conditions at the V BUS, DP_IN, and DM_IN pins. On these pins, the TPD3S713x-Q1 can handle overvoltages up to 18 V for hot plug and DC events and shut off the internal switches to the upstream transceiver from harmful voltage and current spikes.
The V BUS pin also provides an adjustable current limited load switch from 50 mA to 600 mA, which provides flexibility and also saves system power budget when the port requires only several tens of milliampere.
The TPD3S713x-Q1 device has a current-sense output that is able to control an upstream supply, which allows it to maintain 5 V at the remote USB port connected after a long USB cables.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPD3S713-Q1 and TPD3S713A-Q1 Automotive USB 2.0 Interface Protection With Adjustable Current Limit and Short-to-VBATT Protection datasheet (Rev. B) | PDF | HTML | 2023/04/19 |
| Functional safety information | TPD3S713-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) | PDF | HTML | 2023/10/18 | |
| Certificate | TPD3S713Q1EVM-103 EU RoHS Declaration of Conformity (DoC) | 2020/09/23 | ||
| EVM User's guide | TPD3S713Q1EVM-103 User's Guide | 2019/12/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPD3S713Q1EVM-103 — 조정 가능한 전류 제한을 지원하는 TPD3S713-Q1 오토모티브 USB 2.0 인터페이스 보호 평가 모듈
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| WQFN (RVC) | 20 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치