TX7364
- Transmitter supports:
- 64-channel 3-level pulser and active transmit/ receive (T/R) switch
- 3-level pulser:
- Maximum output voltage: ±100V
- Minimum output voltage: ±1V
- Maximum output current: 1A
- True return to zero to discharge output to ground
- Second harmonic of –40dBc at 5MHz
- –3-dB Bandwidth with 400Ω || 125pF load
- 22MHz for a ±100-V supply
- Very low receive power: 0.1 mW/ch
- Active transmit/receive (T/R) switch with:
- Turn on resistance of 26Ω
- Turn on and Turn off time: 100ns
- Transient glitch: 10mVPP
- On-chip beam former with:
- Channel based T/R switch on and off controls
- Delay resolution: half beamformer clock period, minimum 2.5ns
- Maximum delay: 214 beamformer clock period
- Maximum beamformer clockspeed: 200MHz
- On-Chip RAM for pattern and delay profile
- One 512 × 32 memory to store beam-former pattern and delay for a group of 4 channels
- Global repeat feature present, enabling long duration patterns
- High-speed (400 MHz maximum), 2-lane LVDS serial programming interface.
- Low programming time: ≈2.5 us for delay profile update
- 32-bit Checksum to detect wrong SPI writes
- Supports CMOS serial programming interface (50 MHz maximum)
- High reliability features:
- Internal temperature sensor and automatic thermal shutdown
- No specific power sequencing requirement
- Error flag register to detect faulty conditions
- Integrated passives for the floating supplies and bias voltages
- Small package: FC-BGA-196 (12 mm × 12 mm) with 0.8-mm pitch
TX7364 is a highly integrated, high-performance transmitter device for ultrasound imaging system. The device has total 64 pulser circuits, 64 transmit/ receive switches (referred as T/R or TR switches) and supports on-chip beamformer (TxBF). The device also integrates on-chip floating power supplies that reduce the number of required high voltage power supplies.
TX7364 has a pulser circuit that generates three-level high voltage pulses (up to ±100 V) that is used to excite multiple channels of an ultrasound transducer. The device supports total 64 outputs. The maximum output current is 1A.
Device can be used as a transmitter solution for many applications like ultrasound imaging, non-destructive testing, SONAR, LIDAR, marine navigation system, brain imaging systems and so on.
Request more information
The full data sheet and other design resources are available. Request now
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TX7364 3-Level, 64-Channel Transmitter with On-Chip Beamformer, T/R Switch datasheet | PDF | HTML | 2024/04/29 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| FCCSP (ACP) | 196 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.