BW-3P-TF02-PRO

Benewake TF02 Pro LiDAR module (long-range distance sensor)

BW-3P-TF02-PRO

From: Benewake
Order now

Overview

The TF02 PRO module is based on the OPT3101 and is a single-point long-range LiDAR sensor. The sensor is low cost, small size and low power consumption with excellent performance produced by Benewake.

Proximity sensors
OPT3101 ToF-based long-range proximity and distance sensor analog front end (AFE)
Download View video with transcript Video
Photos courtesy of Benewake

Order & start development

Evaluation board

TF02-PRO — TF02 Pro LiDAR module

TI's Standard Terms and Conditions for Evaluation Items apply.

Support & training

Third-party support
TI does not offer ongoing direct design support for this hardware. For support while working through your design, contact Benewake.

Videos

Disclaimer

Certain information and resources (including links to non-TI sites) above may be provided by a third-party partner, and is included here merely for your convenience. TI is not the provider of, and is not responsible for, the content of such information and resources, and you should evaluate them carefully for your intended uses and on your own behalf. The inclusion of such information and resources here does not imply endorsement of any third-party company by TI, and shall not be construed as a warranty or representation regarding the suitability of any third-party products or services, either alone or in combination with any TI product or service.