MSP-EM-DESIGN-CENTER
適用於 MSP430 MCU 的能源測量設計中心
MSP-EM-DESIGN-CENTER
概覽
能源測量設計中心是一種快速開發工具,可使用 TI 的 MSP430i20xx 和 MSP430F67xx 快閃記憶體微控制器 (MCU) 進行能源測量。它包含圖形使用者介面 (GUI)、文件、軟體庫和範例,可以簡化開發並加速各類電力監控和能源測量應用程式的設計,包括智慧電網和建築自動化。您可使用設計中心來配置、校準和查看結果,無需撰寫程式碼。
您可以在不到五分鐘內完成設計:
- 將 MCU、電壓感測器和電流感測器拖放到 GUI 工作區中。
- 根據您的系統配置設定各感測器和 MCU。
- GUI 將在產生原始程式碼前檢查錯誤。
- 將程式碼匯入 IDE 並對 MCU 進行編程。
- 使用 GUI 輕鬆校準 MCU 並檢視結果。
特點
- 支援的測量:
- 電壓和電流
- RMS
- 峰值
- 功率和能源
- 活躍
- 反應
- 視在
- 功率因數
- 頻率
- 電壓和電流
- 支援的電流感測器:
- 分流
- 電流變壓器 (CT)
- Rogowski 線圈 (RC)
- 查看受支援系統配置的估計 CPU 頻寬(僅限函式庫)
- 為 Code Composer Studio™ 和 IAR Embedded Workbench© IDE 產生原始程式碼專案
- 透過具有以下特性的 USB HID 通訊橋啟用即時目標通訊:
- 單點校準
- 增益
- 相位
- 即時結果
- 數字
- 單點校準
- 可搭配:
- Windows 7+ 作業系統,搭配 Java 1.7+ 版本
- Apple OS X 10.10.1+,搭配 Java 1.7+ 版本
- Linux OS,搭配 Java 版本 1.7+
下載項目
應用軟體及架構
MSP430-ENERGY-MEASUREMENT — Energy Measurement Library for MSP430 MCUs with 24-Bit Sigma-Delta ADCs
支援產品和硬體
產品
MSP430 microcontrollers
硬體開發
子卡
開發套件
開發板
MSP430-ENERGY-MEASUREMENT — Energy Measurement Library for MSP430 MCUs with 24-Bit Sigma-Delta ADCs
Windows Installer for Energy Measurement Design Center
macOS Installer for Energy Measurement Design Center
Linux Installer for Energy Measurement Design Center
產品
MSP430 microcontrollers
硬體開發
子卡
開發套件
開發板
文件
Energy Measurement Design Center Technology Guide
Energy Measurement Design Center API Guide
版本資訊
The Energy Measurement Design Center is a rapid development tool that enables energy measurement using TI MSP430i20xx and MSP430F67xx Flash-based microcontrollers (MCUs). It includes a graphical user interface (GUI), documentation, software library and examples that can simplify development and accelerate designs for power monitoring and energy measurement in smart grid and building automation applications. Start by dragging and dropping a MCU, voltage sensors, and current sensors into the GUI workspace. Configure the MCU and each sensor according to your system configuration. The GUI will check for errors before generating the source code. Import the code into an IDE and program the MCU. The GUI will allow you to easily calibrate the device and view the results.
最新功能
- Software
- Fixed an issue where the MSP430i20xx OSR (sampling rate) did not change from the default value.
- Removed duplicate hal_system_Init() call.
- Re-initialized results after disabling interrupts and writing calibration factors to INFO memory.
- Re-calibrated MSP430i20xx EMDC example projects and firmware images.
- Technology Guide
- Included a flowchart for the EMDC application code including foreground and background processes.
- Added a Known Limitations section to the Introduction for more awareness.
- Fixed the Result Parameter command values in the Commands from Target to EMDC section and sequence diagrams.
- Added more details about the packet structure and checksum calculation in the Communication Protocol Spec section.
- Included the default UART communication settings.
- Updated the EMDC start-up image to fix a broken pixel in the platform bar.
- Fixed some minor formatting issues.
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 使用指南 | Energy Measurement Technology Guide | 2020/8/18 |