SBASAT9 February   2024 ADC12DL1500 , ADC12DL2500 , ADC12DL500

PRODUCTION DATA  

  1.   1
  2. Features
  3. Applications
  4. Description
  5. Pin Configuration and Functions
  6. Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Electrical Characteristics: DC Specifications
    6. 5.6  Electrical Characteristics: Power Consumption
    7. 5.7  Electrical Characteristics: AC Specifications (Dual-Channel Mode)
    8. 5.8  Electrical Characteristics: AC Specifications (Single-Channel Mode)
    9. 5.9  Timing Requirements
    10. 5.10 Switching Characteristics
    11. 5.11 Timing Diagrams
    12. 5.12 Typical Characteristics - ADC12DL500
    13. 5.13 Typical Characteristics - ADC12DL1500 (1GSPS)
    14. 5.14 Typical Characteristics - ADC12DL1500 (1.5GSPS)
    15. 5.15 Typical Characteristics - ADC12DL2500 (2GSPS)
    16. 5.16 Typical Characteristics - ADC12DL2500 (2.5GSPS)
  7. Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Inputs
        1. 6.3.1.1 Analog Input Protection
        2. 6.3.1.2 Full-Scale Voltage (VFS) Adjustment
        3. 6.3.1.3 Analog Input Offset Adjust
      2. 6.3.2 ADC Core
        1. 6.3.2.1 ADC Theory of Operation
        2. 6.3.2.2 ADC Core Calibration
        3. 6.3.2.3 ADC Overrange Detection
        4. 6.3.2.4 Code Error Rate (CER)
        5. 6.3.2.5 Internal Dither
      3. 6.3.3 Timestamp
      4. 6.3.4 Clocking
        1. 6.3.4.1 Noiseless Aperture Delay Adjustment (tAD Adjust)
        2. 6.3.4.2 Aperture Delay Ramp Control (TAD_RAMP)
        3. 6.3.4.3 SYSREF Capture for Multi-Device Synchronization and Deterministic Latency
          1. 6.3.4.3.1 SYSREF Position Detector and Sampling Position Selection (SYSREF Windowing)
          2. 6.3.4.3.2 Automatic SYSREF Calibration
      5. 6.3.5 LVDS Digital Interface
        1. 6.3.5.1 Multi-Device Synchronization and Deterministic Latency Using Strobes
          1. 6.3.5.1.1 Dedicated Strobe Pins
          2. 6.3.5.1.2 Reduced Width Interface With Dedicated Strobe Pins
          3. 6.3.5.1.3 LSB Replacement With a Strobe
          4. 6.3.5.1.4 Strobe Over All Data Pairs
      6. 6.3.6 Alarm Monitoring
        1. 6.3.6.1 Clock Upset Detection
      7. 6.3.7 Temperature Monitoring Diode
      8. 6.3.8 Analog Reference Voltage
    4. 6.4 Device Functional Modes
      1. 6.4.1 Dual-Channel Mode (Non-DES Mode)
      2. 6.4.2 Internal Dither Modes
      3. 6.4.3 Single-Channel Mode (DES Mode)
      4. 6.4.4 LVDS Output Driver Modes
      5. 6.4.5 LVDS Output Modes
        1. 6.4.5.1 Staggered Output Mode
        2. 6.4.5.2 Aligned Output Mode
        3. 6.4.5.3 Reducing the Number of Strobes
        4. 6.4.5.4 Reducing the Number of Data Clocks
        5. 6.4.5.5 Scrambling
        6. 6.4.5.6 Digital Interface Test Patterns and LVSD SYNC Functionality
          1. 6.4.5.6.1 Active Pattern
          2. 6.4.5.6.2 Synchronization Pattern
          3. 6.4.5.6.3 User-Defined Test Pattern
      6. 6.4.6 Power-Down Modes
      7. 6.4.7 Calibration Modes and Trimming
        1. 6.4.7.1 Foreground Calibration Mode
      8. 6.4.8 Offset Calibration
      9. 6.4.9 Trimming
    5. 6.5 Programming
      1. 6.5.1 Using the Serial Interface
        1. 6.5.1.1 SCS
        2. 6.5.1.2 SCLK
        3. 6.5.1.3 SDI
        4. 6.5.1.4 SDO
        5. 6.5.1.5 80
        6. 6.5.1.6 Streaming Mode
        7. 6.5.1.7 82
  8. Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1 Reconfigurable Dual-Channel 2.5GSPS or Single-Channel 5GSPS Oscilloscope
        1. 7.2.1.1 Design Requirements
          1. 7.2.1.1.1 Input Signal Path
          2. 7.2.1.1.2 Clocking
          3. 7.2.1.1.3 ADC12DLx500
        2. 7.2.1.2 Application Curves
    3. 7.3 Initialization Set Up
    4. 7.4 Power Supply Recommendations
      1. 7.4.1 Power Sequencing
    5. 7.5 Layout
      1. 7.5.1 Layout Guidelines
      2. 7.5.2 Layout Example
  9. Register Maps
    1. 8.1 SPI_REGISTER_MAP Registers
  10. Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 Development Support
    2. 9.2 Receiving Notification of Documentation Updates
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Typical Characteristics - ADC12DL2500 (2.5GSPS)

Typical values are at TA = 25°C, nominal supply voltages, default full-scale voltage (FS_RANGE_A = FS_RANGE_B = 0xA000), fIN = 347MHz, AIN = –1dBFS, fCLK = 2.5GHz, filtered 1VPP sine-wave clock, DES_EN = 1, LDEMUX = 1, LALIGNED = 0, ADC_DITH = 0x01, LVDS driver high-swing mode (HSM) and foreground calibration; SNR results exclude DC, HD2 to HD9 and interleaving spurs; SINAD, ENOB, and SFDR results exclude DC and signal-independent interleaving spurs (fS / 4 and fS / 2 spurs)

GUID-20240123-SS0I-WMSC-LJDK-J2F2PNVPMRBW-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-210 SNR vs Input Frequency
GUID-20240123-SS0I-LXVL-JQ7J-2SKNXQZSNPCN-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-212 SINAD vs Input Frequency
GUID-20240123-SS0I-2TXN-CCP0-BMPV1S4R2HZS-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-214 ENOB vs Input Frequency
GUID-20240123-SS0I-Q63Z-2KD5-LSHC5RGWPQTB-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-216 SFDR vs Input Frequency
GUID-20240123-SS0I-VZ9Z-GSPJ-N0B61SBFX6ZP-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-218 HD2 and HD3 vs Input Frequency
GUID-20240123-SS0I-L0NV-NBWN-R89LFTZHFPGV-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, includes fS / 2 – fIN spur only
Figure 5-220 Worst Interleaving Spur vs Input Frequency
GUID-20240125-SS0I-DVMZ-MP4T-GN4BLFZZQJMG-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-222 SNR vs Sampling Rate
GUID-20240125-SS0I-FKRV-TPLW-BGJZSCF3XDKH-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-224 SINAD vs Sampling Rate
GUID-20240125-SS0I-MZ7J-NBFF-JBZK9D2RQJLH-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-226 ENOB vs Sampling Rate
GUID-20240125-SS0I-V56R-NRCL-2S1D0XS52JM4-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-228 SFDR vs Sampling Rate
GUID-20240125-SS0I-CXKW-FB6V-TKFM89XH9RH6-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-230 SNR vs Input Power
GUID-20240125-SS0I-WVD1-XNWF-S3JRMPNCVDTG-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-232 SINAD vs Input Power
GUID-20240125-SS0I-M1KG-N7SH-SCSGMD8KZGKM-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-234 ENOB vs Input Power
GUID-20240125-SS0I-XR2M-WCMP-2GWH6XDLL1PQ-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-236 SFDR vs Input Power
GUID-20240125-SS0I-LSJQ-RGVW-L3F83RTGVLTX-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-238 SNR vs Clock Amplitude
GUID-20240125-SS0I-858N-QXTJ-R5WLBHDZPFS9-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-240 SINAD vs Clock Amplitude
GUID-20240125-SS0I-TMZZ-7K1F-GXX497MZF2L2-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-242 ENOB vs Clock Amplitude
GUID-20240125-SS0I-WFND-9CKS-THDVCLRBCMMW-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration
Figure 5-244 SFDR vs Clock Amplitude
GUID-20240125-SS0I-D2GS-9GP7-QBTCFHBGVN9K-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, SNR = 57.1dBFS, SFDR = 70.3dBFS, ENOB = 9.1 bits
Figure 5-246 Single-Tone FFT at fIN = 99MHz, AIN = –1dBFS
GUID-20240125-SS0I-HGWC-LTGQ-PTX9F4XPV2VL-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, SNR = 56.7dBFS, SFDR = 65.7dBFS, ENOB = 9.0 bits
Figure 5-248 Single-Tone FFT at fIN = 347MHz, AIN = –1dBFS
GUID-20240125-SS0I-NRH5-S2B6-DZR7LWFZNXQL-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, SNR = 56.8dBFS, SFDR = 65.8dBFS, ENOB = 9.0 bits
Figure 5-250 Single-Tone FFT at fIN = 797MHz, AIN = –1dBFS
GUID-20240125-SS0I-FSST-BKCD-9FZMTBDDV0PG-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, SNR = 55.2dBFS, SFDR = 64.6dBFS, ENOB = 8.7 bits
Figure 5-252 Single-Tone FFT at fIN = 2488MHz, AIN = –1dBFS
GUID-20240125-SS0I-WXVX-M2CF-BT6XDFHN2NL1-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, SNR = 53.2dBFS, SFDR = 53.2dBFS, ENOB = 7.9 bits
Figure 5-254 Single-Tone FFT at fIN = 4997MHz, AIN = –1dBFS
GUID-20240126-SS0I-ZVLH-FXVH-QSV4RN985NCP-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, f1 = 89MHz, f2 = 99MHz, AIN = -7dBFS per tone, SFDR = -72dBFS, IMD3 = -86dBFS, IMD2 = -86dBFS
Figure 5-256 Two-Tone FFT at fIN = 94MHz, AIN = –1dBFS
GUID-20240126-SS0I-TK9N-KKRQ-Q5Q11BWZWHDC-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, f1 = 342MHz, f2 = 352MHz, AIN = -7dBFS per tone, SFDR = -74dBFS, IMD3 = -91dBFS, IMD2 = -80dBFS
Figure 5-258 Two-Tone FFT at fIN = 347MHz, AIN = –1dBFS
GUID-20240126-SS0I-VBXH-PS71-QWQ5X68MK2ZL-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, f1 = 792MHz, f2 = 802MHz, AIN = -7dBFS per tone, SFDR = -76dBFS, IMD3 = -93dBFS, IMD2 = -77dBFS
Figure 5-260 Two-Tone FFT at fIN = 797MHz, AIN = –1dBFS
GUID-20240126-SS0I-HL2J-BGLN-33M77FZBFFBM-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, f1 = 2483MHz, f2 = 2493MHz, AIN = -7dBFS per tone, SFDR = -67dBFS, IMD3 = -74dBFS, IMD2 = -73dBFS
Figure 5-262 Two-Tone FFT at fIN = 2488MHz, AIN = –1dBFS
GUID-20240126-SS0I-W5N3-NX06-CBV9FNVCBZCM-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, FIN = 99MHz
Figure 5-264 DNL vs Code
GUID-20240126-SS0I-WTP6-TZ22-LBWSKPN7KQLQ-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, FIN = 99MHz
Figure 5-266 DNL vs Code
GUID-20240126-SS0I-NRPM-TDCV-TM8J5FTDQVK4-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-268 SNR vs Temperature and Calibration Mode
GUID-20240126-SS0I-SVFF-S8KJ-JNH0VLT9M7LW-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-270 SINAD vs Temperature and Calibration Mode
GUID-20240126-SS0I-F0Q9-ZZ9Z-WDNH00F9Z4CN-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-272 ENOB vs Temperature and Calibration Mode
GUID-20240126-SS0I-GWQK-KBGL-XVTG2PDMKH2N-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-274 SFDR vs Temperature and Calibration Mode
GUID-20240126-SS0I-TNLP-0ZVJ-QLBH21JCJD7W-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 99MHz, AIN = -1dBFS
Figure 5-276 Power Consumption vs Temperature
GUID-20240126-SS0I-SXDK-D289-PT3KV5HB6CJZ-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-278 Performance vs VA19 Supply Voltage
GUID-20240126-SS0I-WMJT-VFLX-SPRVJBLPHMZ0-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-280 Performance vs VA11 Supply Voltage
GUID-20240126-SS0I-WKG2-VHXF-XGJHK9MB742H-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-282 Performance vs VD11 Supply Voltage
GUID-20240126-SS0I-QDVN-HZFM-ZGQQCWLJBZWF-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-284 Performance vs VLVDS Supply Voltage
GUID-20240126-SS0I-RTGS-R5QD-QHRS7X4XRRL6-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-286 VA19 Supply Current vs Clock Rate
GUID-20240126-SS0I-NDKS-WFN1-J9H0RRMTZHP1-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-288 VA11 Supply Current vs Clock Rate
GUID-20240126-SS0I-LKMC-XQDC-XKF1QMNXJW0B-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-290 VD11 Supply Current vs Clock Rate
GUID-20240126-SS0I-PGWV-ZLGN-57ZK1RNKGPFR-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-292 VLVDS Supply Current vs Clock Rate
GUID-20240126-SS0I-XBPM-BSVX-QCWN1J9LDGZ7-low.svg
DES_EN = 0, fS = 2500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-294 Power Consumption vs Clock Rate
GUID-20240123-SS0I-KZMD-GKH1-D7DM6VMRDKBH-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-211 SNR vs Input Frequency
GUID-20240123-SS0I-6G6L-BFTD-JKNWHJWBKJF1-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-213 SINAD vs Input Frequency
GUID-20240123-SS0I-KQZQ-NRJ0-M9BSVLLQ2ZPR-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-215 ENOB vs Input Frequency
GUID-20240123-SS0I-HC4D-CHM2-DNT3JJ8SH3VW-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-217 SFDR vs Input Frequency
GUID-20240123-SS0I-8KVV-VVXJ-HDVDK39RCVML-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-219 HD2 and HD3 vs Input Frequency
GUID-20240123-SS0I-SCMP-X30N-KPRLV8DMHZFN-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, includes fS / 2 – fIN and fS /4 ± fIN spurs only
Figure 5-221 Worst Interleaving Spur vs Input Frequency
GUID-20240125-SS0I-BSQT-DLJ3-NQ6GHV2TJ10N-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-223 SNR vs Sampling Rate
GUID-20240125-SS0I-LZGV-KKLJ-V7VWJDV5MSBC-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-225 SINAD vs Sampling Rate
GUID-20240125-SS0I-PP86-9X1K-GV7DLLNF3RL4-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-227 ENOB vs Sampling Rate
GUID-20240125-SS0I-TQRM-LKTT-F0JL6LDMCK1D-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-229 SFDR vs Sampling Rate
GUID-20240125-SS0I-2Q6F-8RBB-QW0BVT8WK6BQ-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-231 SNR vs Input Power
GUID-20240125-SS0I-ZQPZ-Q06D-TWRTCF8QRG73-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-233 SINAD vs Input Power
GUID-20240125-SS0I-SDVT-ZD62-HLMNV8DB6QVR-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-235 ENOB vs Input Power
GUID-20240125-SS0I-JDKN-5RJL-2JHWXRF7VZCZ-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-237 SFDR vs Input Power
GUID-20240125-SS0I-HWNN-LSFH-KD7SGRWWMXFN-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-239 SNR vs Clock Amplitude
GUID-20240125-SS0I-F65G-LX1K-RLSCC3KNMJZJ-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-241 SINAD vs Clock Amplitude
GUID-20240125-SS0I-KLRC-QMBN-6JS4STC0BMDW-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-243 ENOB vs Clock Amplitude
GUID-20240125-SS0I-JTRN-MHJT-GC4HQHJZZTBM-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration
Figure 5-245 SFDR vs Clock Amplitude
GUID-20240125-SS0I-FPHH-LNCW-X2GF0P6TXCBW-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, SNR = 57.0dBFS, SFDR = 71.7dBFS, ENOB = 9.1 bits
Figure 5-247 Single-Tone FFT at fIN = 99MHz, AIN = –1dBFS
GUID-20240125-SS0I-ZZQ3-C35X-LXV7W3MX9LWG-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, SNR = 57.3dBFS, SFDR = 70.1dBFS, ENOB = 9.1 bits
Figure 5-249 Single-Tone FFT at fIN = 347MHz, AIN = –1dBFS
GUID-20240125-SS0I-8W2G-FMGL-QDHGH229MLXP-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, SNR = 57.1dBFS, SFDR = 70.2dBFS, ENOB = 9.0 bits
Figure 5-251 Single-Tone FFT at fIN = 797MHz, AIN = –1dBFS
GUID-20240125-SS0I-2BSW-VGLT-P4CBKTPWGZ8R-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, SNR = 55.7dBFS, SFDR = 61.5dBFS, ENOB = 8.5 bits
Figure 5-253 Single-Tone FFT at fIN = 2488MHz, AIN = –1dBFS
GUID-20240126-SS0I-1DHT-K044-BR3R5W5Q6GP5-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, f1 = 89MHz, f2 = 99MHz, AIN = -7dBFS per tone, SFDR = -71dBFS, IMD3 = -86dBFS, IMD2 = -71dBFS
Figure 5-255 Two-Tone FFT at fIN = 94MHz, AIN = –1dBFS
GUID-20240126-SS0I-T8K9-28BR-LTSVBH3H9GDC-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, f1 = 342MHz, f2 = 352MHz, AIN = -7dBFS per tone, SFDR = -74dBFS, IMD3 = -86dBFS, IMD2 = -88dBFS
Figure 5-257 Two-Tone FFT at fIN = 347MHz, AIN = –1dBFS
GUID-20240126-SS0I-8GMH-ZWP9-QZFCH6JS2VHF-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, f1 = 792MHz, f2 = 802MHz, AIN = -7dBFS per tone, SFDR = -76dBFS, IMD3 = -91dBFS, IMD2 = -78dBFS
Figure 5-259 Two-Tone FFT at fIN = 797MHz, AIN = –1dBFS
GUID-20240126-SS0I-6KVH-VW0W-8C4LZV6HCVL2-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, f1 = 2483MHz, f2 = 2493MHz, AIN = -7dBFS per tone, SFDR = -70dBFS, IMD3 = -76dBFS, IMD2 = -74dBFS
Figure 5-261 Two-Tone FFT at fIN = 2488MHz, AIN = –1dBFS
GUID-20240126-SS0I-WCBT-ZCPN-XBS11HBXTQVF-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, f1 = 4992MHz, f2 = 5002MHz, AIN = -7dBFS per tone, SFDR = -58dBFS, IMD3 = -61dBFS, IMD2 = -78dBFS
Figure 5-263 Two-Tone FFT at fIN = 4997MHz, AIN = –1dBFS
GUID-20240126-SS0I-3DKM-KXVL-LLPPPJ0FTTGB-low.svg
DES_EN = 0, fS = 2500MHz, FG calibration, FIN = 99MHz
Figure 5-265 INL vs Code
GUID-20240126-SS0I-ZHGB-BQRR-VFLSBN2MR8VZ-low.svg
DES_EN = 1, fS = 5000MHz, FG calibration, FIN = 99MHz
Figure 5-267 INL vs Code
GUID-20240126-SS0I-LTLS-29W1-HVSNKZZCTLZ1-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-269 SNR vs Temperature and Calibration Mode
GUID-20240126-SS0I-HMFC-4LZK-HVDDHPGKKWBD-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-271 SINAD vs Temperature and Calibration Mode
GUID-20240126-SS0I-JZWX-KH00-B3CCCMWW5SC8-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-273 ENOB vs Temperature and Calibration Mode
GUID-20240126-SS0I-9KTC-XD1X-JNQ6QSB6FNPF-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-275 SFDR vs Temperature and Calibration Mode
GUID-20240126-SS0I-PFW2-0WML-59KSH3WLQXGM-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 99MHz, AIN = -1dBFS
Figure 5-277 Power Consumption vs Temperature
GUID-20240126-SS0I-T98L-TTPV-LTDNVPNJDMNH-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-279 Performance vs VA19 Supply Voltage
GUID-20240126-SS0I-TMVF-X35Z-DKNSMZMVC9QW-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-281 Performance vs VA11 Supply Voltage
GUID-20240126-SS0I-83BL-SPZV-KSK7TSLDGWMH-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-283 Performance vs VD11 Supply Voltage
GUID-20240126-SS0I-NZMD-6WKH-T1XFPVM3NN1D-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-285 Performance vs VLVDS Supply Voltage
GUID-20240126-SS0I-R6DX-FDN5-BGG3LTDCRJ34-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-287 VA19 Supply Current vs Clock Rate
GUID-20240126-SS0I-T0LZ-MVD5-W1MZLSTTCSHS-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-289 VA11 Supply Current vs Clock Rate
GUID-20240126-SS0I-1ZCL-CR5X-K2D7RBC4ZSX0-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-291 VD11 Supply Current vs Clock Rate
GUID-20240126-SS0I-STTL-HVFB-T4XDDS3W9L05-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-293 VLVDS Supply Current vs Clock Rate
GUID-20240126-SS0I-FK7G-QKFJ-RLHVQ1FW1DQ4-low.svg
DES_EN = 1, fS = 5000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-295 Power Consumption vs Clock Rate