SLVSNG5 October   2026 ADS111S04

ADVANCE INFORMATION  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Switching Characteristics
    8. 6.8 Timing Diagram
  8. 7 Parameter Measurement Information
    1. 7.1 Noise Performance
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagrams
    3. 8.3 Feature Description
      1. 8.3.1 Multiplexer
      2. 8.3.2 Voltage Reference
      3. 8.3.3 Oscillator
      4. 8.3.4 Output Data Rate and Conversion Time
      5. 8.3.5 Low-Noise PGA
      6. 8.3.6 Temperature Sensor
        1. 8.3.6.1 12-Bit Temperature Data Format (ADS101S04)
        2. 8.3.6.2 Converting from Digital Codes to Temperature, 12-Bit Temperature Sensor Data
        3. 8.3.6.3 14-Bit Temperature Data Format (ADS101S04)
        4. 8.3.6.4 Converting from Digital Codes to Temperature, 14-Bit Temperature Sensor Data
    4. 8.4 Device Functional Modes
      1. 8.4.1 Power-Up and Reset
      2. 8.4.2 Operating Modes
        1. 8.4.2.1 Single-Shot Conversion Mode
        2. 8.4.2.2 Continuous-Conversion Mode
    5. 8.5 Programming
      1. 8.5.1 Serial Interface (SPI)
      2. 8.5.2 Chip Select (CS)
      3. 8.5.3 Serial Clock (SCLK)
      4. 8.5.4 Data Input (DIN)
      5. 8.5.5 Data Output and Data Ready (DOUT/DRDY)
      6. 8.5.6 Data Retrieval and Device Configuration
        1. 8.5.6.1 32-Bit Data Transmission Cycle
        2. 8.5.6.2 16-Bit Data Transmission Cycle
    6. 8.6 Conversion Data Format
  10. 9 Register Maps
  11. 10Application and Implementation
    1. 10.1 Application Information
      1. 10.1.1 Serial Interface Connections
      2. 10.1.2 Connecting Multiple Devices
      3. 10.1.3 Single-Ended Inputs
      4. 10.1.4 Unused Inputs and Outputs
      5. 10.1.5 Input Protection
      6. 10.1.6 Analog Input Filtering
      7. 10.1.7 Duty Cycling For Low Power
      8. 10.1.8 Pseudo Code Example
    2. 10.2 Typical Applications
      1. 10.2.1 Two K-Type Thermocouples with Thermistor Cold-Junction Compensation
        1. 10.2.1.1 Design Requirements
        2. 10.2.1.2 Detailed Design Procedure
      2. 10.2.2 Server Card System Monitoring Application
    3. 10.3 Power Supply Recommendations
      1. 10.3.1 Power-Supply Sequencing
      2. 10.3.2 Power-Supply Decoupling
    4. 10.4 Layout
      1. 10.4.1 Layout Guidelines
      2. 10.4.2 Layout Example
  12. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 Support Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  13. 12Revision History
  14. 13Mechanical, Packaging, and Orderable Information

Refer to the PDF data sheet for device specific package drawings

Duty Cycling For Low Power

The noise performance of a ΔΣ ADC generally improves when lowering the output data rate because more samples of the internal modulator are averaged to yield one conversion result. In applications where power consumption is critical, the improved noise performance at low data rates is not always required. For these applications, the ADS1x1S04 support duty cycling that yields significant power savings by periodically requesting high data rate readings at an effectively lower data rate.

The ADS111S04 operating in power-down mode can achieve an effective 10SPS data rate by executing single-shot conversions every 100ms under microcontroller control, with a 4kSPS data rate configured. A conversion at 4kSPS only requires approximately 0.25ms, so the device enters power-down state for the remaining 99.75ms. In this configuration, the device consumes approximately 1/400th the power consumed in continuous-conversion mode.

The duty cycling rate is completely arbitrary and is defined by the controller. The ADS1x1S04 offer lower data rates that do not implement duty cycling and improved noise performance if required.