SLUS891B February   2010  – November 2014

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 Handling Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Battery Voltage Regulation
      2. 7.3.2  Battery Current Regulation
      3. 7.3.3  Precharge
      4. 7.3.4  Charge Termination, Recharge, and Safety Timer
      5. 7.3.5  Power Up
      6. 7.3.6  Enable and Disable Charging
      7. 7.3.7  Automatic Internal Soft-Start Charger Current
      8. 7.3.8  Cycle-by-Cycle Charge Undercurrent Protection
      9. 7.3.9  Input Overvoltage Protection (ACOV)
      10. 7.3.10 Input Undervoltage Lock-Out (UVLO)
      11. 7.3.11 Battery Overvoltage Protection
      12. 7.3.12 Cycle-by-Cycle Charge Overcurrent Protection
      13. 7.3.13 Thermal Shutdown Protection
      14. 7.3.14 Temperature Qualification
      15. 7.3.15 Timer Fault Recovery
      16. 7.3.16 PG Output
      17. 7.3.17 CE (Charge Enable)
      18. 7.3.18 Inductor, Capacitor, and Sense Resistor Selection Guidelines
      19. 7.3.19 Charge Status Outputs
      20. 7.3.20 Battery Detection
        1. 7.3.20.1 Example
    4. 7.4 Device Functional Modes
      1. 7.4.1 Converter Operation
      2. 7.4.2 Synchronous and Non-Synchronous Operation
    5. 7.5 Application Information
    6. 7.6 Typical Application
      1. 7.6.1 Design Requirements
      2. 7.6.2 Detailed Design Procedure
        1. 7.6.2.1 Inductor Selection
        2. 7.6.2.2 Input Capacitor
        3. 7.6.2.3 Output Capacitor
        4. 7.6.2.4 Power MOSFET Selection
        5. 7.6.2.5 Input Filter Design
      3. 7.6.3 Application Curves
  8. 8 Power Supply Recommendations
  9. 9  Layout
    1. 9.1 Layout Guidelines
    2. 9.2 Layout Example
  10. 10Device and Documentation Support
    1. 10.1 Trademarks
    2. 10.2 Third-Party Products Disclaimer
    3. 10.3 Electrostatic Discharge Caution
    4. 10.4 Glossary
  11. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

10 Device and Documentation Support

10.1 Trademarks

All other trademarks are the property of their respective owners.

10.2 Third-Party Products Disclaimer

TI'S PUBLICATION OF INFORMATION REGARDING THIRD-PARTY PRODUCTS OR SERVICES DOES NOT CONSTITUTE AN ENDORSEMENT REGARDING THE SUITABILITY OF SUCH PRODUCTS OR SERVICES OR A WARRANTY, REPRESENTATION OR ENDORSEMENT OF SUCH PRODUCTS OR SERVICES, EITHER ALONE OR IN COMBINATION WITH ANY TI PRODUCT OR SERVICE.

10.3 Electrostatic Discharge Caution

esds-image

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

10.4 Glossary

SLYZ022 — TI Glossary.

This glossary lists and explains terms, acronyms, and definitions.