SLVSFQ0A October   2020  – June 2021 TPS54J061

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Enable and Internal LDO
      2. 7.3.2  Split Rail and External LDO
      3. 7.3.3  Output Voltage Setting
      4. 7.3.4  Soft Start and Output-Voltage Tracking
      5. 7.3.5  Frequency and Operation Mode Selection
      6. 7.3.6  D-CAP3 Control
      7. 7.3.7  Current Sense and Positive Overcurrent Protection
      8. 7.3.8  Low-side FET Negative Current Limit
      9. 7.3.9  Power Good
      10. 7.3.10 Overvoltage and Undervoltage Protection
      11. 7.3.11 Out-Of-Bounds Operation (OOB)
      12. 7.3.12 Output Voltage Discharge
      13. 7.3.13 UVLO Protection
      14. 7.3.14 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 Auto-Skip Eco-Mode Light Load Operation
      2. 7.4.2 Forced Continuous-Conduction Mode
      3. 7.4.3 Pre-Bias Start-up
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1  Choose the Switching Frequency and Operation Mode (MODE Pin)
        2. 8.2.2.2  Choose the Output Inductor (L)
        3. 8.2.2.3  Set the Current Limit (TRIP)
        4. 8.2.2.4  Choose the Output Capacitors (COUT)
        5. 8.2.2.5  Choose the Input Capacitors (CIN)
        6. 8.2.2.6  Feedback Network (FB Pin)
        7. 8.2.2.7  Soft Start Capacitor (SS/REFIN Pin)
        8. 8.2.2.8  EN Pin Resistor Divider
        9. 8.2.2.9  VCC Bypass Capacitor
        10. 8.2.2.10 BOOT Capacitor
        11. 8.2.2.11 Series BOOT Resistor and RC Snubber
        12. 8.2.2.12 PGOOD Pullup Resistor
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Support Resources
    3. 11.3 Receiving Notification of Documentation Updates
    4. 11.4 Trademarks
    5. 11.5 Glossary
    6. 11.6 Electrostatic Discharge Caution
  12. 12Mechanical, Packaging, and Ordering Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

3 Description

The TPS54J061 device is a high-efficiency, small-sized, synchronous buck converter with an adaptive on-time D-CAP3™ control mode. The device offers ease-of-use and low external-component count for space-conscious power systems.

This device features high-performance integrated MOSFETs, accurate ±1% 600-mV reference with an junction temperature range between –40°C and +125°C. Competitive features include very-low external-component count, fast load-transient response, accurate load regulation and line regulation, auto-skip or FCCM mode operation, adjustable soft-start control, and external compensation is not needed to support all ceramic capacitor design .

TPS54J061 is available in a 14-pin QFN package.

Device Information(1)
PART NUMBER PACKAGE BODY SIZE (NOM)
TPS54J061 QFN (14) 2.00 mm × 3.00 mm
(1) For available package, see the addendum at the end of the data sheet.
GUID-E3FC3591-F2CB-46EB-97C7-90A584A5DFD5-low.pngSimplified Schematic
GUID-20200921-CA0I-P0DS-FBLX-HVVF70QGLP3S-low.gifTypical Efficiency (VOUT = 1.8 V, fSW = 600 kHz)