SCDS337F December 2012 – June 2019 TS3USB3000
The TS3USB3000 has a high impedance mode that places all the signal paths in a Hi-Z state while the device is not in use. To put the device in high impedance mode and disable the switch, the bus-switch enable pin OE must be supplied with a logic High signal as shown in Table 1.
|X||High||Both USB and MHL switches in High-Z|
|Low||Low||D+/D– to USB+/USB–|
|High||Low||D+/D– to MHL+/MHL–|