SBOS275 Data sheet

SBOS275G June 2003 – December 2015 VCA810

PRODUCTION DATA.

Package Options

Mechanical Data (Package|Pins)

D|8
- MSOI002K

Thermal pad, mechanical data (Package|Pins)

Orderable Information

7 Specifications

7.1 Absolute Maximum Ratings

Over operating free-air temperature range, unless otherwise noted.⁽¹⁾

	MIN	MAX	UNIT
Power supply		±6.5	V
Internal power dissipation	See Thermal Information
Differential input voltage		±V_S	V
Input common-mode voltage		±V_S	V
Junction temperature, T_J		150	°C
Storage temperature, T_stg	–65	125	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

7.2 ESD Ratings

			VALUE	UNIT
V_(ESD)	Electrostatic discharge	Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾	±2000	V
		Charged-device model (CDM), per JEDEC specification JESD22-C101⁽²⁾	±1500
		Machine Model (MM)	±200

(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

		MIN	NOM	MAX	UNIT
Temperature		–40	25	85	°C
Supply voltage		±4	±5	±5.5	V

7.4 Thermal Information

THERMAL METRIC⁽¹⁾		VCA810	UNIT
		D (SOIC)
		8 PINS
R_θJA	Junction-to-ambient thermal resistance	80	°C/W
R_θJC(top)	Junction-to-case (top) thermal resistance	51	°C/W
R_θJB	Junction-to-board thermal resistance	45	°C/W
ψ_JT	Junction-to-top characterization parameter	14	°C/W
ψ_JB	Junction-to-board characterization parameter	45	°C/W
R_θJC(bot)	Junction-to-case (bottom) thermal resistance	n/a	°C/W

(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953.

7.5 Electrical Characteristics

At R_L = 500 Ω and V_IN = single-ended input on V+ with V− at ground, V_S = ±5 V, unless otherwise noted.

PARAMETER		TEST CONDITIONS		TEST LEVEL⁽³⁾	MIN	TYP	MAX	UNIT
AC PERFORMANCE
	Small-signal bandwidth (see Functional Block Diagram)	−2 V ≤ V_C ≤ 0 V	T_J = 25°C			35		MHz
			T_J = 25°C⁽¹⁾	B	30
			T_J = 0°C to 70°C⁽²⁾		29
			T_J = –40°C to 85°C⁽²⁾		29
	Large-signal bandwidth	V_O = 2 V_PP, −2 ≤ V_C ≤ −1	T_J = 25°C	B		35		MHz
			T_J = 25°C⁽¹⁾		30
			T_J = 0°C to 70°C⁽²⁾		29
			T_J = –40°C to 85°C⁽²⁾		29
	Frequency response peaking	V_O < 500 mV_PP, −2 V ≤ V_C ≤ 0 V	T_J = 25°C	B		0.1		dB
			T_J = 25°C⁽¹⁾		0.5
			T_J = 0°C to 70°C⁽²⁾		0.5
			T_J = –40°C to 85°C⁽²⁾		0.5
	Slew rate	V_O = 3.5-V step, −2 ≤ V_C ≤ −1, 10% to 90%	T_J = 25°C	B		350		V/μs
			T_J = 25°C⁽¹⁾		300
			T_J = 0°C to 70°C⁽²⁾		300
			T_J = –40°C to 85°C⁽²⁾		295
	Settling time to 0.01%	V_O = 1-V step, −2 ≤ V_C ≤ −1	T_J = 25°C	B		30		ns
			T_J = 25°C⁽¹⁾		40
			T_J = 0°C to 70°C⁽²⁾		41
			T_J = –40°C to 85°C⁽²⁾		41
	Rise-and-fall time	V_O = 1-V step, −2 ≤ V_C ≤ −1	T_J = 25°C	B		10		ns
			T_J = 25°C⁽¹⁾		12
			T_J = 0°C to 70°C⁽²⁾		12.1
			T_J = –40°C to 85°C⁽²⁾		12.1
	Group delay	G = 0 dB, V_C= −1 V, f = 5 MHz, V_O = 500 mV_PP	T_J = 25°C	C		6.2		ns
	Group delay variation	V_O < 500 mV_PP, −2 V ≤ V_C ≤ 0 V, f = 5 MHz	T_J = 25°C	C		3.5		ns
HD2	Second harmonic distortion	V_O = 1 V_PP, f = 1 MHz, V_C = −1 V, G = 0 dB	T_J = 25°C	B		–71		dBc
			T_J = 25°C⁽¹⁾		–51
			T_J = 0°C to 70°C⁽²⁾		–50
			T_J = –40°C to 85°C⁽²⁾		–49
HD3	Third harmonic distortion	V_O = 1 V_PP, f = 1 MHz, V_C = −1 V, G = 0 dB	T_J = 25°C	B		−35		dBc
			T_J = 25°C⁽¹⁾		–34
			T_J = 0°C to 70°C⁽²⁾		–32
			T_J = –40°C to 85°C⁽²⁾		–29
	Input voltage noise	V_C = −2 V	T_J = 25°C	B		2.4		nV/√Hz
			T_J = 25°C⁽¹⁾				2.8
			T_J = 0°C to 70°C⁽²⁾				3.4
			T_J = –40°C to 85°C⁽²⁾				3.5
	Input current noise	−2 V ≤ V_C ≤ 0 V	T_J = 25°C	B		1.4		pA/√Hz
			T_J = 25°C⁽¹⁾				1.8
			T_J = 0°C to 70°C⁽²⁾				2
			T_J = –40°C to 85°C⁽²⁾				2.1
	Fully attenuated feedthrough	f ≤ 1 MHz, V_C > 200 mV	T_J = 25°C	B		−80		dB
	Fully attenuated feedthrough	f ≤ 1 MHz, V_C > 200 mV	T_J = 25°C⁽¹⁾	B			−70	dB
	Overdrive recovery	V_IN = 2 V to 0 V, V_C = −2 V, G = 40 dB	T_J = 25°C	B		100		ns
	Overdrive recovery	V_IN = 2 V to 0 V, V_C = −2 V, G = 40 dB	T_J = 25°C⁽¹⁾	B	150			ns
DC PERFORMANCE (Single-Ended or Differential Input)
	Output offset voltage (both inputs grounded)⁽⁴⁾	−2 V ≤ V_C ≤ 0 V	T_J = 25°C	A		±4		mV
			T_J = 25°C⁽¹⁾				±22
			T_J = 0°C to 70°C⁽²⁾				±30
			T_J = –40°C to 85°C⁽²⁾				±32
	Output offset voltage drift	T_J = 0°C to 70°C⁽²⁾		B			±125	V/°C
	Output offset voltage drift	T_J = –40°C to 85°C⁽²⁾		B			±125	V/°C
	Input offset voltage⁽⁴⁾	Both inputs grounded	T_J = 25°C	A		±0.1		mV
			T_J = 25°C⁽¹⁾				±0.25
			T_J = 0°C to 70°C⁽²⁾				±0.3
			T_J = –40°C to 85°C⁽²⁾				±0.35
	input offset voltage drift	T_J = 0°C to 70°C⁽²⁾		B			±1	μV/°C
	input offset voltage drift	T_J = –40°C to 85°C⁽²⁾		B			±1.2	μV/°C
	Input bias current	−2 V ≤ V_C ≤ 0 V	T_J = 25°C	A		−6		μA
			T_J = 25°C⁽¹⁾				–10
			T_J = 0°C to 70°C⁽²⁾				−12
			T_J = –40°C to 85°C⁽²⁾				−14
	Input bias current drift	T_J = 0°C to 70°C⁽²⁾		B			±25	nA/°C
	Input bias current drift	T_J = –40°C to 85°C⁽²⁾		B			±30	nA/°C
	Input offset current	−2 V ≤ V_C ≤ 0 V	T_J = 25°C	A		±100		nA
			T_J = 25°C⁽¹⁾				±600
			T_J = 0°C to 70°C⁽²⁾				±700
			T_J = –40°C to 85°C⁽²⁾				±800
	Input offset current drift	T_J = 0°C to 70°C⁽²⁾		B			±1.4	nA/°C
	Input offset current drift	T_J = –40°C to 85°C⁽²⁾		B			±2.2	nA/°C
INPUT
	Common-mode input range	T_J = 25°C		A		±2.4		V
		T_J = 25°C⁽¹⁾			±2.3
		T_J = 0°C to 70°C⁽²⁾			±2.3
		T_J = –40°C to 85°C⁽²⁾			±2.2
	Common-mode rejection ratio	V_CM = 0.5 V, V_C = −2 V, input-referred	T_J = 25°C	A		95		dB
			T_J = 25°C⁽¹⁾		85
			T_J = 0°C to 70°C⁽²⁾		83
			T_J = –40°C to 85°C⁽²⁾		80
	Input impedance	V_CM = 0 V, single-ended	T_J = 25°C	C		1 \|\| 1		MΩ \|\| pF
	Input impedance	V_CM = 0 V, differential	T_J = 25°C	C		> 10 \|\| < 2		MΩ \|\| pF
	Differential input range⁽⁵⁾	V_C = 0 V, V_CM = 0 V	T_J = 25°C	C		3		V_PP
OUTPUT
	Voltage output swing	V_C = −2 V, R_L = 100 Ω	T_J = 25°C	A		±1.8		V
			T_J = 25°C⁽¹⁾		±1.7
			T_J = 0°C to 70°C⁽²⁾		±1.4
			T_J = –40°C to 85°C⁽²⁾		±1.3
		V_C = −2 V, R_L = 100 Ω	T_J = 25°C	A		±1.7		V
			T_J = 25°C⁽¹⁾		±1.6
			T_J = 0°C to 70°C⁽²⁾		±1.3
			T_J = –40°C to 85°C⁽²⁾		±1.2
	Output current	V_O = 0 V	T_J = 25°C	A		±60		mA
			T_J = 25°C⁽¹⁾		±40
			T_J = 0°C to 70°C⁽²⁾		±35
			T_J = –40°C to 85°C⁽²⁾		±32
	Output short-circuit current	V_O = 0 V	T_J = 25°C	C		±120		mA
	Output impedance	V_O = 0 V, f < 100 kHz	T_J = 25°C	C		0.2		Ω
GAIN CONTROL (V_C, Pin 3, Single-Ended or Differential Input)
	Specified gain range	ΔV_C / ΔdB = 25 mV/dB	T_J = 25°C	C		±40		dB
	Maximum control voltage	G = −40 dB	T_J = 25°C	C		0		V
	Minimum control voltage	G = 40 dB	T_J = 25°C	C		–2		V
	Gain accuracy	−1.8 V ≤ V_C ≤ −0.2 V	T_J = 25°C	A		±0.4		dB
			T_J = 25°C⁽¹⁾				±1.5
			T_J = 0°C to 70°C⁽²⁾				±2.5
			T_J = –40°C to 85°C⁽²⁾				±3.5
		V_C < −1.8 V, V_C > −0.2 V	T_J = 25°C	A		±0.5		dB
			T_J = 25°C⁽¹⁾				±2.2
			T_J = 0°C to 70°C⁽²⁾				±3.7
			T_J = –40°C to 85°C⁽²⁾				±4.7
	Gain drift	−1.8 V ≤ V_C ≤ −0.2 V	T_J = 0°C to 70°C⁽²⁾	B			±0.02	dB/°C
		−1.8 V ≤ V_C ≤ −0.2 V	T_J = –40°C to 85°C⁽²⁾	B			±0.03	dB/°C
		V_C < −1.8 V, V_C > −0.2 V	T_J = 0°C to 70°C⁽²⁾	B			±0.03	dB/°C
		V_C < −1.8 V, V_C > −0.2 V	T_J = –40°C to 85°C⁽²⁾	B			±0.04	dB/°C
	Gain control slope	25°C		C		–40		dB/V
	Gain control linearity⁽⁶⁾	−1.8 V ≤ V_C ≤ 0 V	T_J = 25°C	A		±0.3		dB
			T_J = 25°C⁽¹⁾				±1
			T_J = 0°C to 70°C⁽²⁾				±1.1
			T_J = –40°C to 85°C⁽²⁾				±1.2
		V_C < −1.8 V	T_J = 25°C	A		±0.7		dB
			T_J = 25°C⁽¹⁾				±1.6
			T_J = 0°C to 70°C⁽²⁾				±2.5
			T_J = –40°C to 85°C⁽²⁾				±3.2
	Gain control bandwidth	T_J = 25°C		B		25		MHz
		T_J = 25°C⁽¹⁾			20
		T_J = 0°C to 70°C⁽²⁾			19
		T_J = –40°C to 85°C⁽²⁾			19
	Gain control slew rate	80-dB gain step	T_J = 25°C	C		900		dB/ns
	Gain settling time	1%, 80-dB step	T_J = 25°C	C		0.8		μs
	Input bias current	V_C = −1 V	T_J = 25°C	A		–1.5		μA
			T_J = 25°C⁽¹⁾				–3.5
			T_J = 0°C to 70°C⁽²⁾				–4.5
			T_J = –40°C to 85°C⁽²⁾				–8
	Gain + power-supply rejection ratio	V_C = −2 V, G = 40 dB, +V_S = 5 V ± 0.5 V	T_J = 25°C	A		0.5		dB/V
			T_J = 25°C⁽¹⁾				1.5
			T_J = 0°C to 70°C⁽²⁾				1.8
			T_J = –40°C to 85°C⁽²⁾				2
	Gain – power-supply rejection ratio	V_C = −2 V, G = 40 dB, –V_S = –5 V ± 0.5 V	T_J = 25°C	A		0.7		dB/V
			T_J = 25°C⁽¹⁾				1.5
			T_J = 0°C to 70°C⁽²⁾				1.8
			T_J = –40°C to 85°C⁽²⁾				2
POWER SUPPLY
	Specified operating voltage	T_J = 25°C⁽¹⁾		C		±5		V
	Minimum operating voltage	T_J = 25°C⁽¹⁾		A	±4			V
		T_J = 0°C to 70°C⁽²⁾			±4
		T_J = –40°C to 85°C⁽²⁾			±4
	Maximum operating voltage	T_J =25°C⁽¹⁾		A			±6	V
		T_J = 0°C to 70°C⁽²⁾					±6
		T_J = –40°C to 85°C⁽²⁾					±6
	Positive maximum supply quiescent current	+V_S = 5 V, G = −40 dB	T_J = 25°C	A		10		mA
			T_J = 25°C⁽¹⁾		12.5
			T_J = 0°C to 70°C⁽²⁾		12.6
			T_J = –40°C to 85°C⁽²⁾		12.7
		+V_S = 5 V, G = 40 dB	T_J = 25°C	A		18		mA
			T_J = 25°C⁽¹⁾		20.5
			T_J = 0°C to 70°C⁽²⁾		22
			T_J = –40°C to 85°C⁽²⁾		22.3
	Positive minimum supply quiescent current	+V_S = 5 V, G = –40 dB	T_J = 25°C	A		10		mA
			T_J = 25°C⁽¹⁾				7.5
			T_J = 0°C to 70°C⁽²⁾				7.2
			T_J = –40°C to 85°C⁽²⁾				7.1
		+V_S = 5 V, G = 40 dB	T_J = 25°C	A		18		mA
			T_J = 25°C⁽¹⁾				15.5
			T_J = 0°C to 70°C⁽²⁾				14.5
			T_J = –40°C to 85°C⁽²⁾				13.5
	Negative maximum supply quiescent current⁽⁷⁾	−V_S = −5 V, G = −40 dB	T_J = 25°C	A		12		mA
			T_J = 25°C⁽¹⁾				14.5
			T_J = 0°C to 70°C⁽²⁾				14.6
			T_J = –40°C to 85°C⁽²⁾				14.7
		−V_S = −5 V, G = 40 dB	T_J = 25°C	A		20		mA
			T_J = 25°C⁽¹⁾				22.5
			T_J = 0°C to 70°C⁽²⁾				24.5
			T_J = –40°C to 85°C⁽²⁾				24.8
	Negative minimum supply quiescent current⁽⁷⁾	−V_S = −5 V, G = −40 dB	T_J = 25°C	A		12		mA
			T_J = 25°C⁽¹⁾		9.5
			T_J = 0°C to 70°C⁽²⁾		9.4
			T_J = –40°C to 85°C⁽²⁾		9.3
		−V_S = −5 V, G = 40 dB	T_J = 25°C	A		20		mA
			T_J = 25°C⁽¹⁾		17.5
			T_J = 0°C to 70°C⁽²⁾		16.5
			T_J = –40°C to 85°C⁽²⁾		16
+PSRR	Positive power-supply rejection ratio	Input-referred, V_C = −2 V	T_J = 25°C	A		90		dB
			T_J = 25°C⁽¹⁾		75
			T_J = 0°C to 70°C⁽²⁾		75
			T_J = –40°C to 85°C⁽²⁾		73
–PSRR	Negative power-supply rejection ratio	Input-referred, V_C = −2 V	T_J = 25°C	A		85		dB
			T_J = 25°C⁽¹⁾		70
			T_J = 0°C to 70°C⁽²⁾		70
			T_J = –40°C to 85°C⁽²⁾		68
THERMAL CHARACTERISTICS
	Specified operating range, ID package			C	–40		85	°C

(1) Junction temperature = ambient for 25°C tested specifications.

(2) Junction temperature = ambient at low temperature limit; junction temperature = ambient 30°C at high temperature limit for over temperature specifications.

(3) Test levels: (A) 100% tested at 25°C. Over temperature limits set by characterization and simulation. (B) Limits set by characterization and simulation. (C) Typical value; only for information.

(4) Total output offset is: (Output Offset Voltage ± Input Offset Voltage x Gain).

(5) Maximum input at minimum gain for < 1-dB gain compression.

(6) Maximum deviation from best line fit.

(7) Magnitude.

7.6 High Grade DC Characteristics: V_S = ±5 V (VCA810AID)

At R_L = 500 Ω and V_IN = single-ended input on V+ with V− at ground, unless otherwise noted.

PARAMETER		TEST CONDITIONS		TEST LEVEL⁽³⁾	MIN	TYP	MAX	UNIT
DC PERFORMANCE (Single-Ended or Differential Input)
	Output offset voltage	−2 V < V_C < 0 V	T_J = 25°C	A		±4		mV
			T_J = 25°C⁽¹⁾				±14
			T_J = 0°C to 70°C⁽²⁾				±24
			T_J = –40°C to 85°C⁽²⁾				±26
	Input offset voltage	T_J = 25°C		A		±0.1		mV
		T_J = 25°C⁽¹⁾					±0.2
		T_J = 0°C to 70°C⁽²⁾					±0.25
		T_J = –40°C to 85°C⁽²⁾					±0.3
	Input offset current	T_J = 25°C		A		±100		nA
		T_J = 25°C⁽¹⁾					±500
		T_J = 0°C to 70°C⁽²⁾					±600
		T_J = –40°C to 85°C⁽²⁾					±700
GAIN CONTROL (V_C, Pin 3, Single-Ended or Differential Input)
	Gain accuracy	−1.8 V ≤ V_C ≤ −0.2 V	T_J = 25°C	A		±0.4		dB
			T_J = 25°C⁽¹⁾				±0.9
			T_J = 0°C to 70°C⁽²⁾				±1.9
			T_J = –40°C to 85°C⁽²⁾				±2.9
		V_C < −1.8 V, V_C > −0.2 V	T_J = 25°C	A		±0.5		dB
			T_J = 25°C⁽¹⁾				±1.5
			T_J = 0°C to 70°C⁽²⁾				±3.0
			T_J = –40°C to 85°C⁽²⁾				±4.0
	Gain control linearity⁽¹⁾	−1.8 V ≤ V_C ≤ 0 V	T_J = 25°C	A		±0.3		dB
			T_J = 25°C⁽¹⁾				±0.6
			T_J = 0°C to 70°C⁽²⁾				±0.7
			T_J = –40°C to 85°C⁽²⁾				±0.8
		V_C < −1.8 V	T_J = 25°C	A		±0.7		dB/V
			T_J = 25°C⁽¹⁾				±1.1
			T_J = 0°C to 70°C⁽²⁾				±1.9
			T_J = –40°C to 85°C⁽²⁾				±2.7
POWER SUPPLY
	Positive maximum supply quiescent current	+V_S = 5 V, G = −40 dB	T_J = 25°C	A		10		mA
			T_J = 25°C⁽¹⁾		11.5
			T_J = 0°C to 70°C⁽²⁾		11.6
			T_J = –40°C to 85°C⁽²⁾		11.7
		+V_S = 5 V, G = 40 dB	T_J = 25°C	A		18		mA
			T_J = 25°C⁽¹⁾		19.5
			T_J = 0°C to 70°C⁽²⁾		21
			T_J = –40°C to 85°C⁽²⁾		21.3
	Positive minimum supply quiescent current	+V_S = 5 V, G = −40 dB	T_J = 25°C	A		10		mA
			T_J = 25°C⁽¹⁾				8.5
			T_J = 0°C to 70°C⁽²⁾				8.2
			T_J = –40°C to 85°C⁽²⁾				8.1
		+V_S = 5 V, G = 40 dB	T_J = 25°C	A		18		mA
			T_J = 25°C⁽¹⁾				16.5
			T_J = 0°C to 70°C⁽²⁾				15.5
			T_J = –40°C to 85°C⁽²⁾				14.5
	Negative maximum supply quiescent current⁽²⁾	−V_S = −5 V, G = −40 dB	T_J = 25°C	A		12		mA
			T_J = 25°C⁽¹⁾		14
			T_J = 0°C to 70°C⁽²⁾		14.1
			T_J = –40°C to 85°C⁽²⁾		14.2
		−V_S = −5 V, G = 40 dB	T_J = 25°C	A		20		mA
			T_J = 25°C⁽¹⁾		22
			T_J = 0°C to 70°C⁽²⁾		24
			T_J = –40°C to 85°C⁽²⁾		24.3
	Negative minimum supply quiescent current⁽²⁾	−V_S = −5 V, G = −40 dB	T_J = 25°C	A		12		mA
			T_J = 25°C⁽¹⁾				10
			T_J = 0°C to 70°C⁽²⁾				9.9
			T_J = –40°C to 85°C⁽²⁾				9.8
		−V_S = −5 V, G = 40 dB	T_J = 25°C	A		20		mA
			T_J = 25°C⁽¹⁾				18
			T_J = 0°C to 70°C⁽²⁾				17
			T_J = –40°C to 85°C⁽²⁾				16.5