SWRS070B March   2008  – September 2014 CC2591

PRODUCTION DATA.  

  1. 1Device Overview
    1. 1.1 Features
    2. 1.2 Applications
    3. 1.3 Description
    4. 1.4 Functional Block Diagram
  2. 2Revision History
  3. 3Terminal Configuration and Functions
    1. 3.1 Pin Attributes
  4. 4Specifications
    1. 4.1 Absolute Maximum Ratings
    2. 4.2 Handling Ratings
    3. 4.3 Recommended Operating Conditions
    4. 4.4 Electrical Characteristics
    5. 4.5 Thermal Resistance Characteristics for RGV Package
    6. 4.6 Typical Characteristics
  5. 5Applications, Implementation, and Layout
    1. 5.1 CC2591EM Evaluation Module
    2. 5.2 Controlling the Output Power from CC2591
      1. 5.2.1 Input Levels on Control Pins
      2. 5.2.2 Connecting CC2591 to a CC24xx Device
      3. 5.2.3 Connecting CC2591 to the CC2500, CC2510, or CC2511 Device
      4. 5.2.4 Connecting CC2591 to a CC2520 Device
  6. 6Device and Documentation Support
    1. 6.1 Device Support
      1. 6.1.1 Development Support
      2. 6.1.2 Device Nomenclature
    2. 6.2 Documentation Support
      1. 6.2.1 Community Resources
    3. 6.3 Trademarks
    4. 6.4 Electrostatic Discharge Caution
    5. 6.5 Export Control Notice
    6. 6.6 Glossary
  7. 7Mechanical Packaging and Orderable Information
    1. 7.1 Packaging Information

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

5 Applications, Implementation, and Layout

NOTE

Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI’s customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality.

5.1 CC2591EM Evaluation Module

cc2591em_wrs070.gifFigure 5-1 CC2591EM Evaluation Module

Table 5-1 List of Materials (See CC2591EM Reference Design)

DEVICE FUNCTION VALUE
L112 Part of antenna match. 1.5 nH: LQW15AN1N5B00 from Murata
L111 DC block. 1 nF: GRM1555C1H102JA01 from Murata
C111 Part of antenna match. 1 pF: GRM1555C1H1R0BZ01 from Murata
C161 Decoupling capacitor. 1 nF: GRM1555C1H102JA01 from Murata
C11/C12 Decoupling. Will affect PA resonance. 10 pF || 1 nF. The smallest cap closest. See CC2591EM reference design (SWRU190) for placement.
10 pF: GRM1555C1H100JZ01 from Murata
1 nF: GRM1555C1H102JA01 from Murata
C101/C102 Decoupling. Will affect PA resonance. 18 pF || 1 nF. The smallest cap closest. See CC2591EM reference design (SWRU190) for placement.
18 pF: GRM1555C1H180JZ01 from Murata
1 nF: GRM1555C1H102JA01 from Murata
C131/C132 Decoupling. Will affect PA resonance. 10 pF || 1 nF. The smallest cap closest. See CC2591EM reference design (SWRU190) for placement.
10 pF: GRM1555C1H100JZ01 from Murata
1 nF: GRM1555C1H102JA01 from Murata
C2 Decoupling of external balun 1 nF: GRM1555C1H102JA01 from Murata
TL11 Transmission line. Will affect PA resonance. See CC2591EM reference design.
TL101 Transmission line. Will affect PA resonance. See CC2591EM reference design.
TL131 Transmission line. Will affect LNA resonance. See CC2591EM reference design.
R151 Bias resistor 4.3 kΩ: RK73H1ETTP4301F from Koa

5.2 Controlling the Output Power from CC2591

The output power of CC2591 is controlled by controlling the input power. The CC2591 PA is designed to work in compression (class AB), and the best efficiency is reached when a strong input signal is applied.

5.2.1 Input Levels on Control Pins

The four digital control pins (PAEN, EN, HGM, RXTX) have built-in level-shifting functionality, meaning that if the CC2591 is operating from a 3.6-V supply voltage, the control pins will still sense 1.6-V - 1.8-V signals as logical ‘1’.

An example of the above would be that RXTX is connected directly to the RXTX pin on CC24xx, but the global supply voltage is 3.6 V. The RXTX pin on CC24xx will switch between 0 V (RX) and 1.8 V(TX), which is still a high enough voltage to control the mode of CC2591.

The input voltages should however not have logical ‘1’ level that is higher than the supply.

5.2.2 Connecting CC2591 to a CC24xx Device

Table 5-2 Control Logic for Connecting CC2591 to a CC24xx Device

PAEN = EN RXTX HGM MODE OF OPERATION
0 X X Power Down
1 0 0 RX Low Gain Mode
1 0 1 RX High Gain Mode
1 1 X TX
cc24_wrs070.gifFigure 5-2 CC2591 + CC24xx Application Circuit

5.2.3 Connecting CC2591 to the CC2500, CC2510, or CC2511 Device

Table 5-3 Control Logic for Connecting CC2591 to a CC2500/10/11 Devices

PAEN EN RXTX HGM MODE OF OPERATION
0 0 NC X Power Down
0 1 NC 0 RX LGM
0 1 NC 1 RX HGM
1 0 NC X TX
1 1 NC X Not allowed
cc25_10_11_wrs070.gifFigure 5-3 CC2591 + CC2500/10/11 Device Application Circuit

5.2.4 Connecting CC2591 to a CC2520 Device

Table 5-4 Control Logic for Connecting CC2591 to a CC2520 Device

PAEN EN RXTX HGM MODE OF OPERATION
0 0 NC X Power Down
0 1 NC 0 RX LGM
0 1 NC 1 RX HGM
1 0 NC X TX
1 1 NC X Not allowed
cc25_20wrs070.gifFigure 5-4 CC2591 + CC2520 Application Circuit