Table 4-15 eUSCI (UART Mode) Switching Characteristicsover recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
||UART receive deglitch time (1)
||UCGLITx = 0
||2.0 V, 3.0 V
|UCGLITx = 1
|UCGLITx = 2
|UCGLITx = 3
(1) Pulses on the UART receive input (UCxRX) shorter than the UART receive deglitch time are suppressed. To make sure that pulses are correctly recognized their width should exceed the maximum specification of the deglitch time.
Table 4-16 lists the supported frequencies of the eUSCI in SPI master mode.