SLVSBW5A April   2013  – December 2016 TPS54628

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics - DC
    6. 6.6 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Auto-Skip Eco-Mode™ Control
      2. 7.3.2 Soft Start and Prebiased Soft Start
      3. 7.3.3 Output Discharge Control
      4. 7.3.4 Current Protection
      5. 7.3.5 Overvoltage Protection
      6. 7.3.6 UVLO Protection
      7. 7.3.7 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 PWM Operation
      2. 7.4.2 PWM Frequency and Adaptive On-Time Control
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Output Voltage Resistors Selection
        2. 8.2.2.2 Output Filter Selection
        3. 8.2.2.3 Input Capacitor Selection
        4. 8.2.2.4 Bootstrap Capacitor Selection
        5. 8.2.2.5 VREG5 Capacitor Selection
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
    3. 10.3 Thermal Considerations
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 Community Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

6 Specifications

6.1 Absolute Maximum Ratings

See(1)
MIN MAX UNIT
Input voltage VIN, EN –0.3 20 V
VBST –0.3 26
VBST (10-ns transient) –0.3 28
VBST (vs SW) –0.3 6.5
VFB, SS –0.3 6.5
SW –2 20
SW (10-ns transient) –3 22
Output voltage VREG5 –0.3 6.5 V
GND –0.3 0.3
Voltage from GND to thermal pad, Vdiff –0.2 0.2 V
Operating junction temperature, TJ –40 150 °C
Storage temperature, Tstg –55 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM)(1) ±2000 V
Charged-device model (CDM) ±500
(1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.

6.3 Recommended Operating Conditions

MIN MAX UNIT
VIN Supply input voltage 4.5 18 V
Input voltage VBST –0.1 24 V
VBST (10-ns transient) –0.1 27
VBST (vs SW) –0.1 6
SS –0.1 5.7
EN –0.1 18
VFB –0.1 5.5
SW –1.8 18
SW (10-ns transient) –3 21
GND –0.1 0.1
VO Output voltage (VREG5) –0.1 5.7 V
IO Output current (IVREG5) 0 5 mA
TA Operating free-air temperature –40 85 °C
TJ Operating junction temperature –40 150 °C

6.4 Thermal Information

THERMAL METRIC(1) TPS54628 UNIT
DDA
(SO PowerPAD)
8 PINS
RθJA Junction-to-ambient thermal resistance 43.5 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 49.4 °C/W
RθJB Junction-to-board thermal resistance 25.6 °C/W
ψJT Junction-to-top characterization parameter 7.4 °C/W
ψJB Junction-to-board characterization parameter 25.5 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance 5.2 °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

6.5 Electrical Characteristics – DC

Over operating free-air temperature range and VIN = 12 V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SUPPLY CURRENT
IVIN Operating non-switching supply current VIN current, TA = 25°C, EN = 5 V,
VFB = 0.8 V		 950 1400 µA
IVINSDN Shutdown supply current VIN current, TA = 25°C, EN = 0 V 3 10 µA
LOGIC THRESHOLD
VEN EN high-level input voltage EN 1.6 V
EN low-level input voltage EN 0.6
REN EN pin resistance to GND VEN = 12 V 200 400 800 kΩ
VFB VOLTAGE AND DISCHARGE RESISTANCE
VFBTH VFB threshold voltage TA = 25°C, VO = 1.05 V, IO = 10 mA,
Eco-Mode operation		 772 mV
TA = 25°C, VO = 1.05 V,
continuous mode operation		 757 765 773 mV
TA = –40 to 85°C, VO = 1.05 V,
continuous mode operation(1)		 751 765 779 mV
IVFB VFB input current VFB = 0.8 V, TA = 25°C 0 ±0.15 µA
VREG5 OUTPUT
VVREG5 VREG5 output voltage TA = 25°C, 6 V < VIN < 18 V,
0 < IVREG5 < 5 mA		 5.2 5.5 5.7 V
IVREG5 Output current VIN = 6 V, VREG5 = 4 V, TA = 25°C 20 mA
VOUT DISCHARGE
RDISCHG VOUT discharge resistance EN = 0 V, SW = 0.5 V, TA = 25°C 500 800 Ω
MOSFET
RDS(on) High-side switch resistance 25°C, VBST – SW = 5.5 V 36 mΩ
Low-side switch resistance 25°C 28
CURRENT LIMIT
IOCL Current limit L out = 1.5 µH(1) 6.7 7.3 8.9 A
THERMAL SHUTDOWN
TSDN Thermal shutdown threshold(1) Shutdown temperature 165 °C
Hysteresis 35
ON-TIME TIMER CONTROL
tON ON time VIN = 12 V, VO = 1.05 V 150 ns
tOFF(MIN) Minimum OFF time TA = 25°C, VFB = 0.7 V 260 310 ns
SOFT START
ISS SS charge current VSS = 1 V 4.2 6 7.8 µA
SS discharge current VSS = 0.5 V 1.5 3.3 mA
HICCUP AND OVERVOLTAGE PROTECTION
VOVP Output OVP threshold OVP Detect (L > H) 125%
VHICCUP Output hiccup threshold Hiccup detect (H > L) 65%
THICCUPDELAY Output hiccup delay To hiccup state 250 µs
THICCUPENDELAY Output hiccup enable delay Relative to soft-start time ×1.7
UVLO
UVLO UVLO threshold Wake-up VREG5 voltage 3.45 3.75 4.05 V
Hysteresis VREG5 voltage 0.13 0.32 0.48
(1) Not production tested.

6.6 Typical Characteristics

VIN = 12 V, TA = 25°C (unless otherwise noted).
TPS54628 C001_SLVSBW5.png Figure 1. Supply Current vs Junction Temperature
TPS54628 C003_SLVSBW5.png Figure 3. EN Current vs EN Voltage
TPS54628 C004_SLVSBW5.png Figure 5. 1.05-V Output Voltage vs Output Current
TPS54628 C008_SLVSBW5.png Figure 7. Efficiency vs Output Current
TPS54628 C010_SLVSBW5.png Figure 9. Switching Frequency vs Input Voltage
TPS54628 C013_SLVSBW5.png Figure 11. Output Current vs Ambient Temperature
TPS54628 C002_SLVSBW5.png Figure 2. VIN Shutdown Current vs
Junction Temperature
TPS54628 C012_SLVSBW5.png Figure 4. VFB Voltage vs Junction Temperature
TPS54628 C005_SLVSBW5.png Figure 6. 1.05-V Output Voltage vs Input Voltage
TPS54628 C009_SLVSBW5.png Figure 8. Light Load Efficiency vs Output Current
TPS54628 C011_SLVSBW5.png Figure 10. Switching Frequency vs Output Current