JAJSF24B March 2018 – October 2023 TUSB1002A
PRODUCTION DATA
デバイスごとのパッケージ図は、PDF版データシートをご参照ください。
It may be necessary to incorporate an ESD component to protect the TUSB1002A from electrostatic discharge (ESD). It is recommended that the ESD protection component has working peak voltage of ≥ 2.5 V, a breakdown voltage of ≥ 3.5 V, and a clamp voltage of ≤ 4.3 V. A clamp voltage greater than 4.3 V may require a RESD on each differential pin. The ESD component should be placed near the USB connector.
Manufacturer | Part Number | Required RESD to pass IEC 61000-4-2 Contact ±8-kV |
---|---|---|
Nexperia | PUSB3FR4 | None |
Nexperia | PESD2V8Y1BSF | None |
Texas Instruments | TPD1E04U04DPLR | 2-Ω |
Texas Instruments | TPD4E02B04DQAR | 2-Ω |