SBAU442 December   2023

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Board Overview
    2. 2.2 Required Equipment
    3. 2.3 Hardware Setup
  9. 3Software
    1. 3.1 Software Setup
  10. 4Implementation Results
    1. 4.1 Evaluation Setup
    2. 4.2 EVM Capture
  11. 5Hardware Design Files
    1. 5.1 Schematics
    2. 5.2 PCB Layouts
    3. 5.3 Bill of Materials (BOM)
  12. 6Additional Information
    1. 6.1 Trademarks
  13. 7References

2.2 Required Equipment

  • The following equipment is included in the EVM kit:
    • ADC3910D125EVM
    • FTDI board
    • Mini USB cable
    • Barrel power cable
  • The following equipment is not included with the EVM kit, but is required for proper evaluation.
    • TSW1418EVM for capturing the data from the ADC3910D125
    • HSDC Pro
    • Python (3.10.9)
    • Vivado Lab Solutions (2023.2)
    • Visual Studio Code (VS Code) or preferred IDE
    • At least two, low-noise, signal generators for to provide the ADC sampling clock and an analog input. TI recommends either of the following signal generators:
      • Rohde & Schwarz SMA100A
      • Rohde & Schwarz SMA100B
    • Bandpass filters for the sample clock and the analog inputs. The filters has a narrow passband within 5%-15% of the desired bandwidth and minimal insertion loss.
    • SMA cables for signal connections.