SLAU858A november   2021  – june 2023

 

  1.   1
  2.   AFE881H1 Evaluation Module
  3.   Trademarks
  4. 1Overview
    1. 1.1 Kit Contents
    2. 1.2 Related Documentation From Texas Instruments
  5. 2USB2ANY Interface Adapter
    1. 2.1 Signal Definitions for J10
    2. 2.2 USB2ANY Theory of Operation
  6. 3EVM Hardware Overview
    1. 3.1 Electrostatic Discharge Caution
    2. 3.2 EVM Block Diagram
    3. 3.3 EVM Jumper Summary
    4. 3.4 Terminal and Pin Definitions
    5. 3.5 Connecting the USB2ANY
    6. 3.6 Connecting the USB Cable to the USB2ANY Interface Adapter
    7. 3.7 Optional EVM Operations
      1. 3.7.1 Power Configuration
      2. 3.7.2 External SPI and UART Controllers
  7. 4Software Overview
    1. 4.1 Software Installation
    2. 4.2 Launching the Software
    3. 4.3 Software Features
      1. 4.3.1 AFE881H1 Register Page
      2. 4.3.2 High Level Configuration Page
      3. 4.3.3 Using the Python Scripting Tool
  8. 5Schematics, PCB Layout, and Bill of Materials
    1. 5.1 Board Schematic
    2. 5.2 PCB Components Layout
    3. 5.3 Bill of Materials
  9. 6Revision History

4.3.1 AFE881H1 Register Page

Figure 4-5 shows the AFE881H1 Register page of the AFE881H1EVM GUI. This page allows direct access to all registers on the AFE881H1. The GUI handles page address management, allowing seamless access to registers.

The Register Map section in the center of the page lists all the registers, grouped by the pages in the device. Directly above the Register Map section are four buttons that allow read and write access to all registers.

The Field View section on the right side of the page shows the various fields in the currently selected register. Select a register name to highlight the register. The Field View section displays the register contents as described in the data sheet.

GUID-20210619-CA0I-BXZV-09NR-SNFV2TZPRLBR-low.svgFigure 4-5 AFE881H1 Register Page