SLLU381A April   2024  – December 2025

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
  7. 2Hardware
    1. 2.1  Additional Images
    2. 2.2  Power and Integrated Regulators
    3. 2.3  CAN FD
    4. 2.4  High-Side Switches
    5. 2.5  nRST and LIMP/LSS
    6. 2.6  WAKE/ID Function
    7. 2.7  Digital Interface
    8. 2.8  Header Information
      1. 2.8.1 WAKE/ID Headers
      2. 2.8.2 Other Control Headers
    9. 2.9  Push Buttons
    10. 2.10 Switches
  8. 3Hardware Design Files
    1. 3.1 Schematics
  9. 4Additional Information
    1. 4.1 Trademarks
  10. 5References
  11. 6Revision History

2.10 Switches

There are two switches on the EVM which allow for selection of device settings.

Table 2-5 Switch Functions
Switch Function
SW1

VSEL selector.

  • ON: VCC1 = 5V
  • OFF: VCC1 = 3.3V
SW2

SW pin selector.

  • PU: SW pin pulled to VCC1 via a 1kΩ resistor.
  • FLT: SW pin floating
  • PD: SW pin pulled to GND via a 1kΩ resistor.