SLVUB95C December   2017  – August 2018

 

  1.   DRV10974 Evaluation Module
    1.     Trademarks
    2. 1  DRV10974 EVM Kit Contents
    3. 2  Introduction
      1. 2.1 Features
    4. 3  Quick Start Guide
    5. 4  DRV10974 Onboard Connections
      1. 4.1 Connector (P1) for Power Input
      2. 4.2 Interface Connector (P2) for Phase Windings of Motor
    6. 5  DRV10974 Package
    7. 6  User Interface
      1. 6.1 Jumpers
      2. 6.2 Switch
      3. 6.3 Test Points
    8. 7  CS, RMP, and ADV Resistor Selection
      1. 7.1 CS Resistor Table
      2. 7.2 RMP Resistor Table
      3. 7.3 ADV Resistor Table
    9. 8  Schematic
    10. 9  Bill of Materials (BOM)
    11. 10 EVM Documentation
  2.   Revision History

6.2 Switch

The S1 switch allows the applied power supply voltage to reach the rest of the board. A fuse is used to protect the device from overcurrent. Turn the switch to the On position to power the EVM.