SLVUC18 November   2020 TPS25865-Q1

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Features
    2. 1.2 Applications
  3. 2Schematic
  4. 3General Configuration and Description
    1. 3.1 Physical Access
    2. 3.2 Adjusting the Switching Frequency
    3. 3.3 Current Limit Value
    4. 3.4 Cable Compensation Value
    5. 3.5 Thermal Management
    6. 3.6 Test Setup
  5. 4Board Layout
  6. 5Bill of Materials

Board Layout

Figure 4-1 and Figure 4-2 show the top and bottom assembly. Figure 4-3 and Figure 4-4 show the top side and bottom side 3D view. Figure 4-5 through Figure 4-8 show the layout images of the EVM.

GUID-20201029-CA0I-LNQJ-RSF8-WKZDMMRLBHSL-low.gif Figure 4-1 Top Side Assembly
GUID-20201029-CA0I-DK7P-1TVJ-TXSKGSLCZB0B-low.gif Figure 4-2 Bottom Side Assembly.

GUID-20201029-CA0I-C6BL-GFZQ-WSMMVT4FD2QJ-low.gif Figure 4-3 Top Side 3D View.
GUID-20201029-CA0I-JZQG-PKGW-GZ07KLFTTN0V-low.gif Figure 4-4 Bottom Side 3D View.

GUID-20201029-CA0I-QDRF-KJ5K-NG6BVP6LXP33-low.gif Figure 4-5 Top Layer Layout.
GUID-20201029-CA0I-HHCB-XQ0M-PNGCVQ3BZNLF-low.gif Figure 4-6 Mid-1 Layer Layout.

GUID-20201029-CA0I-DTK8-FVTB-RMFC2VZFX0QS-low.gif Figure 4-7 Mid-2 Layer Layout.
GUID-20201029-CA0I-8KKT-W1KT-XFV39G48SPMN-low.gif Figure 4-8 Bottom Layer Layout.