DLPU058A September   2017  – February  2019 DLP3010 , DLPA3000 , DLPC3433 , DLPC3438

 

  1.   DLP® LightCrafter Display 3010 EVM Gen2 User's Guide
    1.     Trademarks
    2. 1 DLP® LightCrafter™ Display 3010 EVM Gen2 Overview
    3. 2 Safety Instructions
    4. 3 Applicable Documents
    5. 4 What is in the DLP LightCrafter Display 3010 EVM?
    6. 5 Light Engine
    7. 6 Quick-Start Procedure
    8. 7 Circuit Description
      1. 7.1 Connectors and Switches on Main Board
      2. 7.2 Connectors on DLP LightCrafter Display Board
    9. 8 EVM Setup
  2.   Revision History

7.2 Connectors on DLP LightCrafter Display Board

Table 4. Installed Connectors on the DLP LightCrafter Display Board

INSTALLED SWITCHES/PUSH BUTTONS DESCRIPTION
J1 Connector for the DMD flex cable
J2 Connector for Blue LED cable
J3 Connector for Greem LED cable
J4 Connector for Red LED cable
J5 60-pin connector for DLP LightCrafter Display board