SBASAN3A May   2023  – May 2025 AFE7951

PRODUCTION DATA  

  1.   1
  2. 1Features
  3. 2Applications
  4. 3Description
  5. 4Pin Configuration and Functions
  6. 5Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information AFE79xx
    5. 5.5  Transmitter Electrical Characteristics
    6. 5.6  RF ADC Electrical Characteristics
    7. 5.7  PLL/VCO/Clock Electrical Characteristics
    8. 5.8  Digital Electrical Characteristics
    9. 5.9  Power Supply Electrical Characteristics
    10. 5.10 Timing Requirements
    11. 5.11 Switching Characteristics
    12. 5.12 Typical Characteristics
      1. 5.12.1  TX Typical Characteristics 800 MHz
      2. 5.12.2  TX Typical Characteristics at 1.8 GHz
      3. 5.12.3  TX Typical Characteristics at 2.6 GHz
      4. 5.12.4  TX Typical Characteristics at 3.5 GHz
      5. 5.12.5  TX Typical Characteristics at 4.9 GHz
      6. 5.12.6  TX Typical Characteristics at 8.1 GHz
      7. 5.12.7  TX Typical Characteristics at 9.6 GHz
      8. 5.12.8  RX Typical Characteristics at 800 MHz
      9. 5.12.9  RX Typical Characteristics at 1.75-1.9 GHz
      10. 5.12.10 RX Typical Characteristics at 2.6 GHz
      11. 5.12.11 RX Typical Characteristics at 3.5 GHz
      12. 5.12.12 RX Typical Characteristics at 4.9 GHz
      13. 5.12.13 RX Typical Characteristics at 8.1 GHz
      14. 5.12.14 RX Typical Characteristics at 9.6 GHz
      15. 5.12.15 PLL and Clock Typical Characteristics
  7. 6Device and Documentation Support
    1. 6.1 Receiving Notification of Documentation Updates
    2. 6.2 Support Resources
    3. 6.3 Trademarks
    4. 6.4 Electrostatic Discharge Caution
    5. 6.5 Glossary
  8. 7Revision History
  9. 8Mechanical, Packaging, and Orderable Information

5.12.3 TX Typical Characteristics at 2.6 GHz

Typical values at TA = +25°C with nominal supplies. Default conditions: TX input data rate = 491.52 MSPS, fDAC = 11796.48 MSPS (24x interpolation), interleave mode, 1st Nyquist zone output, PLL clock mode with fREF = 491.52 MHz, AOUT = –1 dBFS, DSA = 0 dB, Sin(x)/x enabled, DSA calibrated, TX Clock Dither Enabled

AFE7951 TX Full Scale vs RF Frequency at 11796.48 MSPS
Including PCB and cable losses, Aout = -0.5d BFS, DSA = 0, 2.6 GHz matching
Figure 5-78 TX Full Scale vs RF Frequency at 11796.48 MSPS
AFE7951 TX Uncalibrated Differential Gain Error vs DSA Setting and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz
Differential Gain Error = POUT(DSA Setting – 1) – POUT(DSA Setting) + 1
Figure 5-80 TX Uncalibrated Differential Gain Error vs DSA Setting and Channel at 2.6 GHz
AFE7951 TX Uncalibrated Integrated Gain Error vs DSA Setting and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz
Integrated Gain Error = POUT(DSA Setting) – POUT(DSA Setting = 0) + (DSA Setting)
Figure 5-82 TX Uncalibrated Integrated Gain Error vs DSA Setting and Channel at 2.6 GHz
AFE7951 TX Uncalibrated Differential Gain Error vs DSA Setting and Temperature at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz, channel with the median variation over DSA setting at 25°C
Differential Gain Error = POUT(DSA Setting – 1) – POUT(DSA Setting) + 1
Figure 5-84 TX Uncalibrated Differential Gain Error vs DSA Setting and Temperature at 2.6 GHz
AFE7951 TX Uncalibrated Integrated Gain Error vs DSA Setting and Temperature at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz, channel with the median variation over DSA setting at 25°C
Integrated Gain Error = POUT(DSA Setting) – POUT(DSA Setting = 0) + (DSA Setting)
Figure 5-86 TX Uncalibrated Integrated Gain Error vs DSA Setting and Temperature at 2.6 GHz
AFE7951 TX Uncalibrated Differential Phase Error vs DSA Setting and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz
Differential Phase Error = PhaseOUT(DSA Setting – 1) – PhaseOUT(DSA Setting)
Figure 5-88 TX Uncalibrated Differential Phase Error vs DSA Setting and Channel at 2.6 GHz
AFE7951 TX Uncalibrated Integrated Phase Error vs DSA Setting and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)
Figure 5-90 TX Uncalibrated Integrated Phase Error vs DSA Setting and Channel at 2.6 GHz
AFE7951 TX Uncalibrated Differential Phase Error vs DSA Setting and Temperature at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz, channel with the median variation over DSA setting at 25°C
Differential Phase Error = PhaseOUT(DSA Setting – 1) – PhaseOUT(DSA Setting)
Figure 5-92 TX Uncalibrated Differential Phase Error vs DSA Setting and Temperature at 2.6 GHz
AFE7951 TX Uncalibrated Integrated Phase Error vs DSA Setting and Temperature at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz, channel with the medium variation over DSA setting at 25°C
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)
Figure 5-94 TX Uncalibrated Integrated Phase Error vs DSA Setting and Temperature at 2.6 GHz
AFE7951 TX Output Noise vs Channel and Attenuation at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz, POUT = –13 dBFS
Figure 5-96 TX Output Noise vs Channel and Attenuation at 2.6 GHz
AFE7951 TX IMD3 vs Tone Spacing and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, fCENTER = 2.6 GHz, matching at 2.6 GHz, –13 dBFS each tone
Figure 5-98 TX IMD3 vs Tone Spacing and Channel at 2.6 GHz
AFE7951 TX IMD3 vs Digital Level at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, fCENTER = 2.6 GHz, fSPACING = 20 MHz, matching at 2.6 GHz
Figure 5-100 TX IMD3 vs Digital Level at 2.6 GHz
AFE7951 TX Single Tone Output Noise vs Frequency and Amplitude at 2.6 GHz
Matching at 2.6 GHz, Single tone, fDAC = 11.79648 GSPS, interleave mode, 40-MHz offset
Figure 5-102 TX Single Tone Output Noise vs Frequency and Amplitude at 2.6 GHz
AFE7951 TX 20-MHz LTE ACPR vs Digital Level at 2.6 GHz
Matching at 2.6 GHz, single carrier 20-MHz BW TM1.1 LTE
Figure 5-104 TX 20-MHz LTE ACPR vs Digital Level at 2.6 GHz
AFE7951 TX 20-MHz LTE ACPR vs DSA at 2.6 GHz
Matching at 2.6 GHz, single carrier 20-MHz BW TM1.1 LTE
Figure 5-106 TX 20-MHz LTE ACPR vs DSA at 2.6 GHz
AFE7951 TX 20-MHz LTE ACPR vs DSA at 2.6 GHz
Matching at 2.6 GHz, single carrier 20-MHz BW TM1.1 LTE
Figure 5-108 TX 20-MHz LTE ACPR vs DSA at 2.6 GHz
AFE7951 TX 100-MHz NR ACPR vs DSA at 2.6 GHz
Matching at 2.6 GHz, single carrier 100-MHz BW TM1.1 NR
Figure 5-110 TX 100-MHz NR ACPR vs DSA at 2.6 GHz
AFE7951 TX HD2 vs Digital Amplitude and Output Frequency at 2.6 GHz
Matching at 2.6 GHz, fDAC = 11.79648 GSPS, interleave mode, normalized to output power at harmonic frequency
Figure 5-112 TX HD2 vs Digital Amplitude and Output Frequency at 2.6 GHz
AFE7951 TX Single Tone (–12 dBFS) Output Spectrum at 2.6 GHz (0-fDAC)
fDAC = 8847.36 MSPS, straight mode, 2.6 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT and is due to mixing with digital clocks.
Figure 5-114 TX Single Tone (–12 dBFS) Output Spectrum at 2.6 GHz (0-fDAC)
AFE7951 TX Single Tone (–1 dBFS) Output Spectrum at 2.6 GHz (0-fDAC)
fDAC = 8847.36 MSPS, straight mode, 2.6 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT and is due to mixing with digital clocks.
Figure 5-116 TX Single Tone (–1 dBFS) Output Spectrum at 2.6 GHz (0-fDAC)
AFE7951 TX Output Power vs DSA Setting and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, Aout = -0.5 dBFS, matching 2.6 GHz
Figure 5-79 TX Output Power vs DSA Setting and Channel at 2.6 GHz
AFE7951 TX Calibrated Differential Gain Error vs DSA Setting and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz
Differential Gain Error = POUT(DSA Setting – 1) – POUT(DSA Setting) + 1
Figure 5-81 TX Calibrated Differential Gain Error vs DSA Setting and Channel at 2.6 GHz
AFE7951 TX Calibrated Integrated Gain Error vs DSA Setting and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz
Integrated Gain Error = POUT(DSA Setting) – POUT(DSA Setting = 0) + (DSA Setting)
Figure 5-83 TX Calibrated Integrated Gain Error vs DSA Setting and Channel at 2.6 GHz
AFE7951 TX Calibrated Differential Gain Error vs DSA Setting and Temperature at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz, channel with the median variation over DSA setting at 25°C
Differential Gain Error = POUT(DSA Setting – 1) – POUT(DSA Setting) + 1
Figure 5-85 TX Calibrated Differential Gain Error vs DSA Setting and Temperature at 2.6 GHz
AFE7951 TX Calibrated Integrated Gain Error vs DSA Setting and Temperature at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz, channel with the median variation over DSA setting at 25°C
Integrated Gain Error = POUT(DSA Setting) – POUT(DSA Setting = 0) + (DSA Setting)
Figure 5-87 TX Calibrated Integrated Gain Error vs DSA Setting and Temperature at 2.6 GHz
AFE7951 TX Calibrated Differential Phase Error vs DSA Setting and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz
Differential Phase Error = PhaseOUT(DSA Setting – 1) – PhaseOUT(DSA Setting)
Phase DNL spike may occur at any DSA setting.
Figure 5-89 TX Calibrated Differential Phase Error vs DSA Setting and Channel at 2.6 GHz
AFE7951 TX Calibrated Integrated Phase Error vs DSA Setting and Channel at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)
Figure 5-91 TX Calibrated Integrated Phase Error vs DSA Setting and Channel at 2.6 GHz
AFE7951 TX Calibrated Differential Phase Error vs DSA Setting and Temperature at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz, channel with the median variation over DSA setting at 25°C
Differential Phase Error = PhaseOUT(DSA Setting – 1) – PhaseOUT(DSA Setting)
Figure 5-93 TX Calibrated Differential Phase Error vs DSA Setting and Temperature at 2.6 GHz
AFE7951 TX Calibrated Integrated Phase Error vs DSA Setting and Temperature at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, matching at 2.6 GHz, channel with the median variation over DSA setting at 25°C
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)
Figure 5-95 TX Calibrated Integrated Phase Error vs DSA Setting and Temperature at 2.6 GHz
AFE7951 TX IMD3 vs DSA Setting at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, fCENTER = 2.6 GHz, matching at 2.6 GHz, –13 dBFS each tone
Figure 5-97 TX IMD3 vs DSA Setting at 2.6 GHz
AFE7951 TX IMD3 vs Tone Spacing and Temperature at 2.6 GHz
fDAC = 8847.36 MSPS, straight mode, fCENTER = 2.6 GHz, matching at 2.6 GHz, –13 dBFS each tone, worst channel.
Figure 5-99 TX IMD3 vs Tone Spacing and Temperature at 2.6 GHz
AFE7951 TX IMD3 vs Tone Spacing and Temperature
fDAC = 8847.36 MSPS, straight mode, fCENTER = 2.6 GHz, matching at 2.6 GHz, –13 dBFS each tone
Figure 5-101 TX IMD3 vs Tone Spacing and Temperature
AFE7951 TX 20-MHz LTE Output Spectrum at 2.6 GHz (Band 41)
TM1.1, POUT_RMS = –13 dBFS
Figure 5-103 TX 20-MHz LTE Output Spectrum at 2.6 GHz (Band 41)
AFE7951 TX 20-MHz LTE alt-ACPR vs Digital Level at 2.6 GHz
Matching at 2.6 GHz, single carrier 20-MHz BW TM1.1 LTE
Figure 5-105 TX 20-MHz LTE alt-ACPR vs Digital Level at 2.6 GHz
AFE7951 TX 20-MHz LTE alt-ACPR vs DSA at 2.6 GHz
Matching at 2.6 GHz, single carrier 20-MHz BW TM1.1 LTE
Figure 5-107 TX 20-MHz LTE alt-ACPR vs DSA at 2.6 GHz
AFE7951 TX 20-MHz LTE alt-ACPR vs DSA at 2.6 GHz
Matching at 2.6 GHz, single carrier 20-MHz BW TM1.1 LTE
Figure 5-109 TX 20-MHz LTE alt-ACPR vs DSA at 2.6 GHz
AFE7951 TX 100-MHz NR alt-ACPR vs DSA at 2.6 GHz
Matching at 2.6 GHz, single carrier 100-MHz BW TM1.1 NR
Figure 5-111 TX 100-MHz NR alt-ACPR vs DSA at 2.6 GHz
AFE7951 TX HD3 vs Digital Amplitude and Output Frequency at 2.6 GHz
Matching at 2.6 GHz, fDAC = 11.79648GSPS, interleave mode, normalized to output power at harmonic frequency
Figure 5-113 TX HD3 vs Digital Amplitude and Output Frequency at 2.6 GHz
AFE7951 TX Single Tone (–6 dBFS) Output Spectrum at 2.6 GHz (0-fDAC)
fDAC = 8847.36 MSPS, straight mode, 2.6 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT and is due to mixing with digital clocks.
Figure 5-115 TX Single Tone (–6 dBFS) Output Spectrum at 2.6 GHz (0-fDAC)
AFE7951 TX IMD3 vs Supply Voltage at 2.6 GHz
fDAC = 11796.48 MSPS, interleave mode, 2.6 GHz matching. 40-MHz offset from tone. Output Power = –13 dBFS. All supplies simultaneously at MIN, TYP, or MAX voltages.
Figure 5-117 TX IMD3 vs Supply Voltage at 2.6 GHz