SBAU400 November   2023 TMAG5253

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Overview
    1. 1.1 Kit Contents
    2. 1.2 Related Documentation From Texas Instruments
  5. 2Hardware
    1. 2.1 Features
  6. 3Operation
    1. 3.1 Quick Start Setup
    2. 3.2 EVM Operation
  7. 4Schematics, PCB Layout, and Bill of Materials
    1. 4.1 Schematic
    2. 4.2 Component Functions
    3. 4.3 PCB Layout
    4. 4.4 Bill of Materials

3.1 Quick Start Setup

The following instructions describe how to set up and use the EVM.

  1. Supply power to the device through one of these methods:
    • Apply a 3.3-V potential (see Figure 3-1)
    • Insert a CR1025 coin cell battery into the holder (see Figure 3-1)
  2. Toggle the enable switch on.
GUID-20220906-SS0I-4BBX-WP13-RWHTCXKK5TRX-low.svgFigure 3-1 Powering On EVM
GUID-20220906-SS0I-WKLD-67L2-KJGPL4HBXSQL-low.svgFigure 3-2 Enable TMAG5253