SDAA259 January   2026 AM623 , AM625 , AM625-Q1 , AM625SIP , AM62P , AM62P-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Detailed Description
    1. 2.1 Launching Qt Creator
    2. 2.2 Running The First Project on PC
    3. 2.3 Creating a Button
      1. 2.3.1 Modifying the Property of a Button
    4. 2.4 Creating a C++ Back-End Component
      1. 2.4.1 Defining the Scope of the Project
      2. 2.4.2 Connecting Your C++ Application to Your QML Application
    5. 2.5 Connecting to the EVM
    6. 2.6 Building and Deploying Your Application For Your Embedded Platform
      1. 2.6.1 Build the Application
      2. 2.6.2 Transfer Executable to the Board
    7. 2.7 Running the Application
  6. 3Summary
  7. 4References

Running the Application

Before launching the Qt application, enable weston. To do so, export the Wayland display:

export WAYLAND_DISPLAY=/run/user/1000/wayland-1

Now run the applcation: ./ProjectName

 Running Your Application on Your BoardFigure 2-23 Running Your Application on Your Board
 Blinking LED On Your BoardFigure 2-24 Blinking LED On Your Board

Congratulations, the Qt project must now start and display on the board!

When clicking each of the buttons, the green LED shown above either blinks, stays on, or turns off.