SLAAEN9A September   2024  – August 2025

 

  1.   1
  2. 1 Description
  3. 2 Required Peripherals
  4. 3 Design Steps
  5. 4 Design Considerations
  6. 5 Software Flow Charts
  7. 6 Required UART Packet
  8. 7 Device Configuration
  9. 8 Application Code
  10. 9 Additional Resources
  11. 10E2E
  12. 11Revision History
  13. 12Trademarks

2 Required Peripherals

This application requires a UART and I2C peripherals.

Table 2-1 Required Peripherals
Sub-block Functionality Peripheral Use Notes
UART TX-RX Interface (1 ×) UART Called UART_BRIDGE_INST in code
I2C Controllers (2 ×) I2C Called I2C_BRIDGE_INST and I2C_BRIDGE2_INST in code