SLAU883A March   2024  – June 2024 AMC7908

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Setup
      1. 2.1.1 Hardware Theory of Operation
      2. 2.1.2 Jumper Definitions
      3. 2.1.3 Connector Definitions
      4. 2.1.4 Test Points
    2. 2.2 Hardware Overview
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Connecting the FTDI Digital Controller
      3. 2.2.3 SPI Configuration
      4. 2.2.4 I2C Configuration
  9. 3Software
    1. 3.1 Software Setup
      1. 3.1.1 Software Installation
    2. 3.2 Software Overview
      1. 3.2.1 Launching the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 Low Level Configuration Page
        2. 3.2.2.2 High Level Configuration Page
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Revision History

4.2 PCB Layout

Figure 5-4 through Figure 5-7 show the board layout for the AMC7908EVM.

AMC7908EVM AMC7908EVM PCB Top Layer LayoutFigure 4-4 AMC7908EVM PCB Top Layer Layout
AMC7908EVM AMC7908EVM PCB Mid Layer 1 Layout (Ground Plane)Figure 4-5 AMC7908EVM PCB Mid Layer 1 Layout (Ground Plane)
AMC7908EVM AMC7908EVM PCB Mid Layer 2 Layout (Ground Plane)Figure 4-6 AMC7908EVM PCB Mid Layer 2 Layout (Ground Plane)
AMC7908EVM AMC7908EVM PCB Bottom Layer LayoutFigure 4-7 AMC7908EVM PCB Bottom Layer Layout