SLAU904A October   2023  – December 2023

1.   1
2.   Description
3.   Get Started
4.   Features
5.   Applications
6.   6
7. 1Evaluation Module Overview
   1. 1.1 Introduction
   2. 1.2 Kit Contents
   3. 1.3 Specification
   4. 1.4 Device Information
8. 2Hardware
   1. 2.1 Setup
   2. 2.2 AC-MB Settings
      1. 2.2.1 Audio Serial Interface Settings
         1. 2.2.1.1 USB Mode
         2. 2.2.1.2 Optical or Auxiliary Analog Audio Input Mode
         3. 2.2.1.3 External Audio Interface Mode
      2. 2.2.2 AC-MB Power Supply
   3. 2.3 TAx5x42EVM-K Hardware Settings
      1. 2.3.1 TAx5x42 EVM Input Hardware Settings
         1. 2.3.1.1 Line Inputs
         2. 2.3.1.2 On-board Microphone Input
      2. 2.3.2 TAx5x42 EVM Output Hardware Settings
         1. 2.3.2.1 TAx5x42 Analog Audio Output
      3. 2.3.3 Multi-Function Hardware Configurations
         1. 2.3.3.1 MD0 Hardware Configurations
         2. 2.3.3.2 MD1 and MD2 Hardware Configurations
         3. 2.3.3.3 MD3 Hardware Configurations
         4. 2.3.3.4 MD4 and MD5 Hardware Configurations
         5. 2.3.3.5 MD6 (DIN/DOUT) Hardware Configuration
9. 3Software
   1. 3.1 System Overview
   2. 3.2 Configuration Example
10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials (BOM)
       1. 4.3.1 TAC5242 EVM Bill of Materials
       2. 4.3.2 TAC5142 EVM Bill of Materials
       3. 4.3.3 TAA5242 EVM Bill of Materials
       4. 4.3.4 TAD5242 EVM Bill of Materials
       5. 4.3.5 TAD5142 EVM Bill of Materials
11. 5Additional Information
    1. 5.1 Trademarks
12. 6References
13. 7Revision History

IMPORTANT NOTICE AND DISCLAIMER

TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources.

TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 

Copyright © 2023, Texas Instruments Incorporated