SLAU928A May   2024  – September 2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Overview
    2. 2.2 Power Requirements
    3. 2.3 XDS110 Debug Probe
      1. 2.3.1 Isolation Jumper Block
      2. 2.3.2 Application (Backchannel) UART
    4. 2.4 Measure Current Draw of the MSPM0L2228
    5. 2.5 Clocking
    6. 2.6 BoosterPack Plug-in Module Pinout
    7. 2.7 Liquid Crystal Display (LCD)
    8. 2.8 SuperCap
  9. 3Software
    1. 3.1 Software Development Options
    2. 3.2 CCS Cloud
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layers
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation
    1. 6.1 Supplemental Content
  13. 7Revision History

4.2 PCB Layers

LP-MSPM0L2228 PCB Top Layer Figure 4-7 PCB Top Layer
LP-MSPM0L2228 PCB Top Overlay Figure 4-8 PCB Top Overlay
LP-MSPM0L2228 PCB Top Solder Figure 4-9 PCB Top Solder
LP-MSPM0L2228 PCB Bottom Layer Figure 4-10 PCB Bottom Layer
LP-MSPM0L2228 PCB Bottom Overlay Figure 4-11 PCB Bottom Overlay
LP-MSPM0L2228 PCB Bottom Solder Figure 4-12 PCB Bottom Solder
LP-MSPM0L2228 PCB VCC Plane Figure 4-13 PCB VCC Plane
LP-MSPM0L2228 PCB GND Plane Figure 4-14 PCB GND Plane
LP-MSPM0L2228 PCB Drill Drawing Figure 4-15 PCB Drill Drawing