SLAU949 September   2024

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 EVM Setup and Operation
    2. 2.2 Pin Configuration of Opto-emulators
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layout and 3D Diagram
    3. 3.3 Bill of Materials
  8. 4Additional Information
    1. 4.1 Trademarks

2.2 Pin Configuration of Opto-emulators

Figure 2-2 shows the ISOM8110 Single-Channel Opto-emulator with analog transistor output pin configuration.

ISOM-EVM ISOM8110 Single-Channel Opto-emulator with Analog Transistor Output Pin Configuration Figure 2-2 ISOM8110 Single-Channel Opto-emulator with Analog Transistor Output Pin Configuration

Figure 2-3 shows the ISOM8710 High-Speed Single-Channel Opto-emulator pin configuration.

ISOM-EVM ISOM8710 High-Speed Single-Channel Opto-emulator Pin Configuration Figure 2-3 ISOM8710 High-Speed Single-Channel Opto-emulator Pin Configuration

Figure 2-4 shows the ISOM8610 Normally Open Opto-Emulator Switch with Integrated FETs Output pin configuration.

ISOM-EVM ISOM8610 Normally Open Opto-Emulator Switch with Integrated FETs Output Pin Configuration Figure 2-4 ISOM8610 Normally Open Opto-Emulator Switch with Integrated FETs Output Pin Configuration