SLLU378 April   2024 TUSB564-Q1

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Setup
    2. 2.2 TUSB564-Q1 Equalization Control
  9. 3Software
    1. 3.1 Firmware Description
    2. 3.2 GUI Installation
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks

2.2 TUSB564-Q1 Equalization Control

Equalization (EQ) can be controlled using I2C or pin-strapping. Each of the TUSB564-Q1 receiver lanes has individual controls for receiver equalization (see Configuration Pin-Level Definitions). Table 3-3 and Table 3-4 list the gain values of each available combination of downstream, upstream, and DisplayPort configurations.

Table 2-2 Configuration Pin-Level Definitions
Level Settings
0 Option 1: Tie 1kΩ 5% to GND
Option 2: Tie directly to GND
R Tie 20kΩ 5% to GND
F Float (leave pin open)
1 Option 1: Tie 1kΩ 5% to VCC
Option 2: Tie directly to VCC
Table 2-3 USB 3.1 Equalization Settings
EQ Setting # USB 3.1 Upstream Facing Ports USB 3.1 Downstream Facing Ports
EQ1 EQ0 EQ Gain at 2.5GHz (dB) SSEQ1 SSEQ0 EQ Gain at 2.5GHz (dB)
0 0 0 -0.9 0 0 -2.4
1 0 R 0.2 0 R -1.3
2 0 F 1.2 0 F -0.4
3 0 1 2.2 0 1 0.7
4 R 0 3.1 R 0 1.5
5 R R 4.0 R R 2.5
6 R F 4.8 R F 3.2
7 R 1 5.6 R 1 4.0
8 F 0 6.3 F 0 4.8
9 F R 7.0 F R 5.5
10 F F 7.5 F F 6.0
11 F 1 8.1 F 1 6.6
12 1 0 8.5 1 0 7.1
13 1 R 9.1 1 R 7.6
14 1 F 9.5 1 F 8.0
15 1 1 9.9 1 1 8.5
Table 2-4 DisplayPort Equalization Settings
Equalization Setting # DPEQ1 DPEQ0 EQ Gain at 4.05GHz (dB)
0 0 0 -0.3
1 0 R 1.6
2 0 F 3.0
3 0 1 4.4
4 R 0 5.4
5 R R 6.5
6 R F 7.3
7 R 1 8.1
8 F 0 8.9
9 F R 9.5
10 F F 10.0
11 F 1 10.6
12 1 0 11.0
13 1 R 11.4
14 1 F 11.8
15 1 1 12.1