SLUS859C October   2008  – January 2015 TPS54233

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Simplified Schematic
  5. Revision History
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Switching Characteristics
    7. 7.7 Typical Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Feature Description
      1. 8.2.1  Fixed Frequency PWM Control
      2. 8.2.2  Voltage Reference (Vref)
      3. 8.2.3  Bootstrap Voltage (BOOT)
      4. 8.2.4  Enable and Adjustable Input Under-Voltage Lockout (VIN UVLO)
      5. 8.2.5  Programmable Slow Start Using SS PIN
      6. 8.2.6  Error Amplifier
      7. 8.2.7  Slope Compensation
      8. 8.2.8  Current Mode Compensation Design
      9. 8.2.9  Overcurrent Protection and Frequency Shift
      10. 8.2.10 Overvoltage Transient Protection
      11. 8.2.11 Thermal Shutdown
    3. 8.3 Device Functional Modes
      1. 8.3.1 Eco-modeTM
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Switching Frequency
        2. 9.2.2.2 Output Voltage Set Point
        3. 9.2.2.3 Input Capacitors
        4. 9.2.2.4 Output Filter Components
          1. 9.2.2.4.1 Inductor Selection
          2. 9.2.2.4.2 Capacitor Selection
        5. 9.2.2.5 Compensation Components
        6. 9.2.2.6 Bootstrap Capacitor
        7. 9.2.2.7 Catch Diode
        8. 9.2.2.8 Output Voltage Limitations
        9. 9.2.2.9 Power Dissipation Estimate
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
    3. 11.3 Estimated Circuit Area
    4. 11.4 Electromagnetic Interference (EMI) Considerations
  12. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Development Support
    2. 12.2 Trademarks
    3. 12.3 Electrostatic Discharge Caution
    4. 12.4 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

7 Specifications

7.1 Absolute Maximum Ratings(1)

over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
Input Voltage VIN –0.3 30 V
EN –0.3 6
BOOT 38
VSENSE –0.3 3
COMP –0.3 3
SS –0.3 3
Output Voltage BOOT-PH 8 V
PH –0.6 30
PH (10 ns transient from ground to negative peak) –5
Source Current EN 100 μA
BOOT 100 mA
VSENSE 10 μA
PH 6 A
Sink Current VIN 6 A
COMP 100 μA
SS 200
Operating Junction Temperature –40 150 °C
Storage Temperature –65 150 °C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

7.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN TYP MAX UNIT
Operating Input Voltage on (VIN pin) 3.5 28 V
Operating junction temperature, TJ –40 150 °C

7.4 Thermal Information

THERMAL METRIC(1) D UNIT
8 PINS
RθJA Junction-to-ambient thermal resistance 116.7 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 62.4
RθJB Junction-to-board thermal resistance 57.0
ψJT Junction-to-top characterization parameter 14.5
ψJB Junction-to-board characterization parameter 56.5
RθJC(bot) Junction-to-case (bottom) thermal resistance N/A
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

7.5 Electrical Characteristics

TJ = –40°C to 150°C, VIN = 3.5V to 28V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SUPPLY VOLTAGE (VIN PIN)
Internal undervoltage lockout threshold Rising and Falling 3.5 V
Shutdown supply current EN = 0V, VIN = 12V, –40°C to 85°C 1 4 μA
Operating – non switching supply current VSENSE = 0.85 V 75 110 μA
ENABLE AND UVLO (EN PIN)
Enable threshold Rising and Falling 1.25 1.35 V
Input current Enable threshold – 50 mV -1 μA
Input current Enable threshold + 50 mV -4 μA
VOLTAGE REFERENCE
Voltage reference 0.772 0.8 0.828 V
HIGH-SIDE MOSFET
On resistance BOOT-PH = 3 V, VIN = 3.5 V 115 200
BOOT-PH = 6 V, VIN = 12 V 80 150
ERROR AMPLIFIER
Error amplifier transconductance (gm) –2 μA < I(COMP) < 2 μA, V(COMP) = 1 V 92 μmhos
Error amplifier DC gain(1) VSENSE = 0.8 V 800 V/V
Error amplifier unity gain bandwidth(1) 5 pF capacitance from COMP to GND pins 2.7 MHz
Error amplifier source/sink current V(COMP) = 1 V, 100 mV overdrive ±7 μA
Switch current to COMP transconductance VIN = 12 V 9 A/V
PULSE SKIPPING Eco-mode™
Pulse skipping Eco-mode™ switch current threshold 100 mA
CURRENT LIMIT
Current limit threshold VIN = 12 V 2.3 3.5 A
THERMAL SHUTDOWN
Thermal Shutdown 165 °C
SLOW START (SS PIN)
Charge current V(SS) = 0.4 V 2 μA
SS to VSENSE matching V(SS) = 0.4 V 10 mV
(1) Specified by design

7.6 Switching Characteristics

TJ = –40°C to 150°C, VIN = 3.5 to 28 V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SWITCHING FREQUENCY
Device switching frequency VIN = 12 V 210 300 390 kHz
Minimum controllable on time VIN = 12 V, 25°C 105 130 ns
Maximum controllable duty ratio(1) BOOT-PH = 6 V 90% 93%
(1) Specified by design.

7.7 Typical Characteristics

rdson_tj_lvs839.gifFigure 1. On Resistance vs Junction Temperature
fsw_tj_lus859.gifFigure 3. Switching Frequency vs Junction Temperature
min_cont_tj_lus859.gifFigure 5. Minimum Controllable On Time vs
Junction Temperature
iss_tj_lvs839.gifFigure 7. SS Charge Current vs Junction Temperature
vo2_vi_lus859.gifFigure 9. Typical Maximum Output Voltage vs
Input Voltage
isd_vi_lus859.gifFigure 2. Shutdown Quiescent Current vs Input Voltage
vref_tj_lvs839.gifFigure 4. Voltage Reference vs Junction Temperature
min_duty_tj_lus859.gifFigure 6. Minimum Controllable Duty Ratio vs
Junction Temperature
cur_vi_lus859.gifFigure 8. Current Limit Threshold vs Input Voltage
tj_pd_lvs839.gifFigure 10. Maximum Power Dissipation vs
Junction Temperature