SLUUBD0A September   2015  – January 2026

 

  1.   1
  2. 1Trademarks
  3.   Golden GG Maker and Resistance Temperature Compensation Optimizer
    1. 2.1 Tool Summary
    2. 2.2 Required Data
      1. 2.2.1 Configuration File (1 Each)
      2. 2.2.2 Data Log File
        1. 2.2.2.1 Test Setup
        2. 2.2.2.2 9
          1. 2.2.2.2.1 Test Setup for best RbL values
            1. 2.2.2.2.1.1 Test Setup for best thermal model parameters
        3. 2.2.2.3 Test Procedure
      3. 2.2.3 Gauge Configuration (GG) File
      4. 2.2.4 Examples
        1. 2.2.4.1 Config.txt File
        2. 2.2.4.2 Excerpted Example Data Log
  4. 2Tool Summary
  5. 3Required Data
    1. 3.1 Configuration File (1 Each)
    2. 3.2 Data Log File
      1. 3.2.1 Test Setup
      2. 3.2.2 22
      3. 3.2.3 Test Procedure
    3. 3.3 Gauge Configuration (GG) File
    4. 3.4 Examples
      1. 3.4.1 Config.txt File
      2. 3.4.2 Excerpted Example Data Log
  6. 4Data Submission
    1. 4.1 Example Report
  7. 5Revision History

4.1 Example Report

Resistance temperature compensation optimizer, rev3.57		
		
Optimized Impedance Track parameters:		
		
Qmax,mAh : 5222		
		
Ra table normalized to 25C, uncompressed, unscaled		
		
DOD,% Ra,mOhm	
		
  0          113	
 11.11       59	
 22.22       62	
 33.33       64	 
 44.44       64	 
 55.56	   61	
 66.67	   68	
 77.78	   75	
 80.95	   80	
 84.13	   85	
 87.3	    95	
 90.48	   133	
 93.65       196	
 96.83	   346	
 100	     843	
		
Ra0_ch, mOhm : 113	This value is already included in Ra table			
		
Thermal parameters:		
		
Temp a 212
Temp k 0.5
Res Relax Time 178	
		
Optimized resistance temperature compensation parameters saved in chemdat12		
		
		
All GG values updated and saved in gg_out.csv