SLUUCD0B March   2024  – May 2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Device Information
    4. 1.4 General Texas Instruments High Voltage Evaluation (TI HV EMV) User Safety Guidelines
      1. 1.4.1 General Safety Information
  7. 2Hardware
    1. 2.1 Board Parameters
    2. 2.2 IO and Jumper Descriptions
    3. 2.3 Recommended Operating Conditions
    4. 2.4 Communication Interface Setup
      1. 2.4.1 BQSTUDIO Using EV2400
      2. 2.4.2 TI Charger GUI for USB2ANY
    5. 2.5 Equipment
    6. 2.6 Equipment Setup
  8. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layout
    3. 3.3 Bill of Materials
  9. 4Revision History

3.1 Schematics

BQ25758EVM, BQ25758AEVM BQ25758 and BQ25758A EVM Schematic Page 1 Figure 3-1 BQ25758 and BQ25758A EVM Schematic Page 1
BQ25758EVM, BQ25758AEVM BQ25758 and BQ25758A EVM Schematic Page 2Figure 3-2 BQ25758 and BQ25758A EVM Schematic Page 2
BQ25758EVM, BQ25758AEVM BQ25758 and BQ25758A EVM Schematic Page 3Figure 3-3 BQ25758 and BQ25758A EVM Schematic Page 3
BQ25758EVM, BQ25758AEVM BQ25758 and BQ25758A EVM Schematic Page Figure 3-4 BQ25758 and BQ25758A EVM Schematic Page
  1. DNP means "Do Not Populate".