SLUUCS7 april   2023 TPSM843A26

 

  1.    TPSM843A26EVM 16-A, Regulator Evaluation Module
  2.   Trademarks
  3. 1Introduction
    1. 1.1 Background
    2. 1.2 Before You Begin
    3. 1.3 Performance Characteristics Summary
  4. 2Configurations and Modifications
    1. 2.1 Output Voltage
    2. 2.2 Switching Frequency (FSEL Pin)
    3. 2.3 Current Limit, Soft-Start Time, and Internal Compensation (MSEL Pin)
    4. 2.4 Enable, UVLO (EN Pin)
  5. 3Test Setup and Results
    1. 3.1 Input and Output Connections
    2. 3.2 Efficiency
    3. 3.3 Output Voltage Regulation
    4. 3.4 Load Transient and Loop Response
    5. 3.5 Input Voltage Ripple
    6. 3.6 Start-up and Shutdown with EN
    7. 3.7 Start-up and Shutdown with VIN
    8. 3.8 Start-up Into Pre-Bias
    9. 3.9 Thermal Performance
  6. 4Board Layout
    1. 4.1 Layout
  7. 5Schematic and Bill of Materials
    1. 5.1 Schematic
    2. 5.2 Bill of Materials

3.9 Thermal Performance

Figure 3-22 and Figure 3-23 show the temperature rise of the TPSM843A26 at 12-A and 16-A load. A minimum of a 10 minute soak time was used before taking the measurement.

GUID-20230405-SS0I-NBLG-2PN2-VPMJCHCMM4ZP-low.gifFigure 3-22 U1 Thermal Performance – 12-A Load
GUID-20230405-SS0I-61VV-Q6P7-TQ79GJQM7N3W-low.gifFigure 3-23 U1 Thermal Performance – 16-A Load