SLUUD26A April   2024  – May 2024 UCC21231

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Header Information
    3. 2.3 Jumper Information
    4. 2.4 Test Points
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  8. 4Additional Information
    1. 4.1 Trademarks

2.4 Test Points

Table 2-4 Test Point Description
Test Point Test Point Board Marker Description
TP1 VIN Input voltage for VCCI
TP2 GND Input side ground
TP3 VINA Input voltage for VDDA
TP4 INA Channel A input
TP5 PWMIN1 Input signal for INA
TP6 VSSA Output side channel A ground
TP7 GND Input side ground
TP8 OUTA Channel A output
TP9 VGSA Channel A capacitive load
TP10 VCCI Input side VCCI supply
TP11 VDDA Output side channel A supply
TP12 INB Channel B input
TP13 PWMIN2 Input signal for INB
TP14 VSSA Output side channel A ground
TP15 EN Input side EN input
TP16 VDDB Output side channel B supply
TP17 OUTB Channel B output
TP18 GND Input side ground
TP19 DT Dead time pin
TP20 VGSB Channel B capacitive load
TP21 VSSB Output side channel B ground
TP22 GND Input side ground
TP23 GND Input side ground
TP24 VINB Input voltage for VDDB
TP25 VSSB Output side channel B ground
TP26 VSSB Output side channel B ground