SLUUDH8 November   2025

 

  1.   1
  2.   Description
  3. 1Features
  4. 2Applications
  5.   5
  6. 3Evaluation Module Overview
    1. 3.1 Introduction
    2. 3.2 Kit Contents
    3. 3.3 Specification
    4. 3.4 Device Information
  7. 4Hardware
    1. 4.1 Pin Specifications
    2. 4.2 Power Requirements
    3. 4.3 Input and Output Connector
    4. 4.4 Bandpass filter
    5. 4.5 Device Enable/Disable Jumper
  8. 5Hardware Design File
    1. 5.1 Schematic
    2. 5.2 PCB Layouts
    3. 5.3 Bill of Materials (BOM)
  9. 6Revision History
  10.   Trademarks

4.5 Device Enable/Disable Jumper

J_EN_SEL: Short Pin 1 and Pin 2 of the Jumper to disable the device. To keep the device enabled, either short Pin 2 and Pin 3, or remove the jumper and leave the pin floating