SLVSFI1C July   2021  – October 2026 TPS1HC100-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
    1. 4.1 Recommended Connections for Unused Pins
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 SNS Timing Characteristics
    7. 5.7 Switching Characteristics
    8. 5.8 Typical Characteristics
  7. 6 Parameter Measurement Information
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Accurate Current Sense
      2. 7.3.2 Programmable Current Limit
        1. 7.3.2.1 Current Limit Accuracy
        2. 7.3.2.2 Capacitive Charging
      3. 7.3.3 Inductive-Load Switching-Off Clamp
      4. 7.3.4 Full Protections and Diagnostics
        1. 7.3.4.1  Short-Circuit and Overload Protection
        2. 7.3.4.2  Open-Load and Short-to-Battery Detection
        3. 7.3.4.3  Short-to-Battery Detection
        4. 7.3.4.4  Reverse-Polarity and Battery Protection
        5. 7.3.4.5  Latch-Off Mode
        6. 7.3.4.6  Thermal Protection Behavior
        7. 7.3.4.7  UVLO Protection
        8. 7.3.4.8  Loss of GND Protection
        9. 7.3.4.9  Loss of Power Supply Protection
        10. 7.3.4.10 Reverse Current Protection
        11. 7.3.4.11 Protection for MCU I/Os
      5. 7.3.5 Diagnostic Enable Function
    4. 7.4 Device Functional Modes
      1. 7.4.1 Working Mode
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Dynamically Changing Current Limit
        2. 8.2.2.2 AEC Q100-012 Test Grade A Certification
        3. 8.2.2.3 EMC Transient Disturbances Test
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
        1. 8.4.2.1 Without a GND Network
        2. 8.4.2.2 With a GND Network
      3. 8.4.3 Thermal Considerations
  10. 9 Device and Documentation Support
    1. 9.1 Documentation Support
      1. 9.1.1 Related Documentation
    2. 9.2 Receiving Notification of Documentation Updates
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Typical Characteristics

All the following data are based on the mean value of the three lots samples, VVBB = 13.5V if not specified.

TPS1HC100-Q1 Transient Thermal Impedance
Figure 5-1 Transient Thermal Impedance
TPS1HC100-Q1 Output Leakage Current IOUT,STBY vs Temperature
VOUT = 0V VEN = 0V VDIAG_EN = 0V
VBB Varied
Figure 5-3 Output Leakage Current IOUT,STBY vs Temperature
TPS1HC100-Q1 Diagnostic Current IDIA vs Temperature
IOUT = 0A VEN = 0V VDIAG_EN = 5V
VBB Varied
Figure 5-5 Diagnostic Current IDIA vs Temperature
TPS1HC100-Q1 RDSON vs VBB
IOUT = 1A VEN = 5V VDIAG_EN = 5V
VBB Varied
Figure 5-7 RDSON vs VBB
TPS1HC100-Q1 KCL vs Temperature
ROUT = 5μH and 100mΩ VEN = 5V VDIAG_EN = 5V
VBB = 13.5V
Figure 5-9 KCL vs Temperature
TPS1HC100-Q1 KSNS
                        Error vs VBB
IOUT = 1A VEN = 5V VDIAG_EN = 5V
VBB varied RSNS = 1kΩ
Figure 5-11 KSNS Error vs VBB
TPS1HC100-Q1 VSNSFH (5V) vs VBB
ROUT = 5μH and 100mΩ VEN = 5V VDIAG_EN = 5V
VBB varied RSNS = 1kΩ
Figure 5-13 VSNSFH (5V) vs VBB
TPS1HC100-Q1 Turn
                        off time TOFF vs Temperature
ROUT = 10Ω VEN = 5V VDIAG_EN = 5V
VBB varied RSNS = 1kΩ
Figure 5-15 Turn off time TOFF vs Temperature
TPS1HC100-Q1 Falling Slew Rate SRF vs Temperature
ROUT = 10Ω VEN = 5V VDIAG_EN = 5V
VBB varied RSNS = 1kΩ
Figure 5-17 Falling Slew Rate SRF vs Temperature
TPS1HC100-Q1 VIL vs Temperature
ROUT = 1kΩ VEN = 3.3 to 0V VDIAG_EN = 3.3 to 0V
VBB varied RSNS = 1kΩ
Figure 5-19 VIL vs Temperature
TPS1HC100-Q1 Turn-off Time (tOFF)
ROUT = 10Ω VEN = 5 to 0V VDIAG_EN = 0V
VBB = 13.5V RSNS = 1kΩ
Figure 5-21 Turn-off Time (tOFF)
TPS1HC100-Q1 Short
                        Circuit With ILIM Shorted to Ground
ROUT = 5μH and 100mΩ VEN = 5V VDIAG_EN = 5V
VBB = 13.5V RSNS = 1kΩ RILIM = GND
Figure 5-23 Short Circuit With ILIM Shorted to Ground
TPS1HC100-Q1 470μF
                        Capacitive Load Driving
ROUT = 470μF and 10Ω VEN = 5V VDIAG_EN = 5V
VBB = 13.5V RSNS = 1kΩ RILIM = open
Figure 5-25 470μF Capacitive Load Driving
TPS1HC100-Q1 Standby Current ISB vs. Temperature
VOUT = 0V VEN = 0V VDIAG_EN = 0V
VBB Varied
Figure 5-2 Standby Current ISB vs. Temperature
TPS1HC100-Q1 Quiescent Current IQ vs Temperature
IOUT = 0A VEN = 5V VDIAG_EN = 5V
VBB Varied
Figure 5-4 Quiescent Current IQ vs Temperature
TPS1HC100-Q1 RDSON vs Temperature
IOUT = 1A VEN = 5V VDIAG_EN = 5V
VBB Varied
Figure 5-6 RDSON vs Temperature
TPS1HC100-Q1 RONREV vs
                        Temperature
IOUT = 1A VEN = 5V VDIAG_EN = 5V
VBB Varied
Figure 5-8 RONREV vs Temperature
TPS1HC100-Q1 KSNS
                        Error vs Temperature
ROUT varied VEN = 5V VDIAG_EN = 5V
VBB = 13.5V RSNS = 1kΩ
Figure 5-10 KSNS Error vs Temperature
TPS1HC100-Q1 VSNSFH (3.3V) vs
                        VBB
ROUT = 5μH and 100mΩ VEN = 5V VDIAG_EN = 5V
VBB varied RSNS = 1kΩ
Figure 5-12 VSNSFH (3.3V) vs VBB
TPS1HC100-Q1 Turn
                        on time TON vs Temperature
ROUT = 10Ω VEN = 5V VDIAG_EN = 5V
VBB varied RSNS = 1kΩ
Figure 5-14 Turn on time TON vs Temperature
TPS1HC100-Q1 Rising Slew Rate SRR vs Temperature
ROUT = 10Ω VEN = 5V VDIAG_EN = 5V
VBB varied RSNS = 1kΩ
Figure 5-16 Rising Slew Rate SRR vs Temperature
TPS1HC100-Q1 VIH vs Temperature
ROUT = 1kΩ VEN = 0 to 3.3V VDIAG_EN = 0 to 3.3V
VBB varied RSNS = 1kΩ
Figure 5-18 VIH vs Temperature
TPS1HC100-Q1 Turn-on Time (tON)
ROUT = 10Ω VEN = 0 to 5V VDIAG_EN = 0V
VBB = 13.5V RSNS = 1kΩ
Figure 5-20 Turn-on Time (tON)
TPS1HC100-Q1 ISNS
                        Settling Time (tSNSION) on Load Step
IOUT = 500mA to 3A VEN = 5V VDIAG_EN = 5V
VBB = 13.5V RSNS = 1kΩ
Figure 5-22 ISNS Settling Time (tSNSION) on Load Step
TPS1HC100-Q1 5mH
                        Inductive Load Driving
ROUT = 5mH VEN = 5V VDIAG_EN = 5V
VBB = 13.5V RSNS = 1kΩ RILIM = GND
Figure 5-24 5mH Inductive Load Driving
TPS1HC100-Q1 Inductive Load Discharge Energy Capability (TA = 125 ºC)Figure 5-26 Inductive Load Discharge Energy Capability (TA = 125 ºC)