SLVU988A October   2013  – June 2021 TPS56628

 

  1.   Trademarks
  2. 1Introduction
  3. 2Performance Specification Summary
  4. 3Modifications
    1. 3.1 Output Voltage Setpoint
    2. 3.2 Output Filter and Closed-Loop Response
  5. 4Test Setup and Results
    1. 4.1  Input and Output Connections
    2. 4.2  Start-Up Procedure
    3. 4.3  Efficiency
    4. 4.4  Load Regulation
    5. 4.5  Line Regulation
    6. 4.6  Load Transient Response
    7. 4.7  Output Voltage Ripple
    8. 4.8  Input Voltage Ripple
    9. 4.9  Start-Up
    10. 4.10 Shut-Down
  6. 5Board Layout
    1. 5.1 Layout
  7. 6Schematic, Bill of Materials, and Reference
    1. 6.1 Schematic
    2. 6.2 Bill of Materials
    3. 6.3 Reference
  8. 7Revision History

Output Voltage Ripple

The TPS56628EVM-534 output voltage ripple is shown in Figure 4-6. The output current is the rated full load of 6 A.

GUID-AA4FE734-C0B6-45D7-B1B2-B178503CCE54-low.gif Figure 4-6 TPS56628EVM-534 Output Voltage Ripple (IOUT = 6 A)

The TPS56628EVM-534 output voltage ripple is shown in Figure 4-7. The output current is 500 mA.

GUID-C6B4ED4E-87C6-4AC0-85F6-26D7D7791A2C-low.gif Figure 4-7 TPS56628EVM-534 Output Voltage Ripple (IOUT = 500 mA)

The TPS56628EVM-534 output voltage ripple is shown in Figure 4-8. The output current is 10 mA.

GUID-F74A92D0-ABB1-4DB5-9342-60C2D298C9A0-low.gif Figure 4-8 TPS56628EVM-534 Output Voltage Ripple (IOUT = 10 mA)