SLVUCS6 August   2024

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Items Required for Operation
    2. 2.2 Powering the TPS65987DDKEVM
    3. 2.3 Jumper Configuration
    4. 2.4 Connector Functionality
    5. 2.5 Test Points
    6. 2.6 LEDs
    7. 2.7 Switches
  9. 3Software
    1. 3.1 Software Description
    2. 3.2 Debugging the EVM
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks

2.4 Connector Functionality

Table 2-2 lists the TPS65987DDKEVM connector and functionality.

Table 2-2 Connector Functionality
DesignatorDescription
J1USB Type-C connector; TI recommends using an active or e-marked USB Type-C cable.
J2Expansion board connector: Option to connect to external module.
J3Micro-B connector: Connect to a PC to flash a project on the PD controller. Users must download the TPS6598x configuration tool(GUI) to flash a project properly.
J9Barrel jack connector: Use a 19V to 20V DC supply. A standard Dell or HP notebook adapter (or similar) provides the required power.