SLVUDC3 September   2025 TMAG5134

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specifications
    4. 1.4 Device Information
  7. 2Hardware
  8. 3EVM Operation
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 EVM Layout
    3. 4.3 Bill of Materials (BOM)
  10. 5Additional Information
    1. 5.1 Trademarks
  11. 6Related Documentation

3 EVM Operation

To use the EVM with the TI-SCB Controller, connect the EVM as shown in Figure 3-1, or connect the EVM using one of the ways described in Section 2. The TMAG5134 output triggers when a magnet is near the sensor. When the magnetic field at the sensor crosses the threshold of the device, the output turns the LED on. The user can also check the output through the connector on the board.

TMAG5134EVM EVM With MagnetFigure 3-1 EVM With Magnet