SLYU066A October   2023  – June 2024 TMAG3001

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specifications
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 TMAG3001 EVM Components
    2. 2.2 SCB LEDs
  9. 3Software
    1. 3.1 Quick Start Setup
    2. 3.2 EVM Operation
      1. 3.2.1 Setup
        1. 3.2.1.1 Driver Installation
        2. 3.2.1.2 Firmware
          1. 3.2.1.2.1 Updating Firmware on SCB
        3. 3.2.1.3 GUI Setup and Usage
          1. 3.2.1.3.1 Initial Setup
          2. 3.2.1.3.2 GUI Operation
      2. 3.2.2 Rotate and Push Demo
      3. 3.2.3 CRC Calculator
      4. 3.2.4 Direct EVM Serial Communication
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation
  13. 7Revision History
Initial Setup

To set up the GUI the first time, follow these steps:

  1. Make sure that the previously-mentioned driver was installed successfully to make sure that everything works properly.
  2. Plug the connected EVM and SCB unit to the PC and go to the GUI link provided earlier.
  3. Click the GUI Composer application window shown in Figure 4-5 to launch the GUI from the web browser.
    TMAG3001EVM GUI Composer Application WindowFigure 3-5 GUI Composer Application Window
    • For first-time GUI Composer setup, follow the prompts to download the TI Cloud Agent and browser extension shown in Figure 4-6. These prompts appear after you close the README.md dialog.
    TMAG3001EVM TI Cloud AgentFigure 3-6 TI Cloud Agent
  4. Click the TMAG3001EVM icon in the GUI Composer window shown in Figure 4-5 to download the GUI offline (optional).