SPRADR5 July   2025 AM2612 , AM2612-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Using the Power Estimation Tool
  6. 3Processing Elements
  7. 4Interfaces
  8. 5Other Inputs
  9. 6Power Report
  10. 7Summary
  11. 8References

4 Interfaces

The Interface section lets select the functional mode and utilization of a subset of the commonly used interfaces on the device. Utilization here refers to the amount of time the corresponding interface is utilized/active (expressed in-terms of percentage) within a fixed time frame.

Table 4-1 lists the selectable options.

Table 4-1 Selectable Options of Interface Mode and Utilization
Interface Mode Utilization
CMPSS on_3p3v, Unused, Off 0%-100%
ADC on_3p3v, Unused, Off 0%-100%
DAC on_3p3v, Unused, Off 0%-100%
Ethernet[0:1] RGMII/RMII/MII, 10/100/1000MPBS, 3p3v/1p8v, Unused, Off 0%-100%
OSPI[0:1] Controller/Peripheral, DDR/SDR, 3p3v/1p8v
200MHz/166MHz/133MHz/100MHz/
80MHz/67MHz/60MHz/10MHz, Off		 0%-100%
GPMC 16b, 3p3v/1p8v,
133MHz/100MHz/10MHz, Unused, Off		 0%-100%
USB power_down, sleep, device[HS:FS:LS]/idle, host[HS:FS:LS]/idle 0%-100%
EPWM on_3p3v, Unused, Off 0%-100%
MCAN 8MBPS, 3p3v, Unused, Off 0%-100%
MCSPI Controller/Peripheral, 3p3v/1p8v,
1.563/2.083/3.125/6.25/12.5/25/40MBPS, Unused, Off		 0%-100%