Product details

Resolution (Bits) 16 Number of input channels 1 Sample rate (Max) (kSPS) 0.86 Interface type I2C Architecture Delta-Sigma Input type Differential, Single-Ended Rating Automotive Reference mode Int Input range (Max) (V) 5.5 Input range (Min) (V) 0 Features Oscillator Operating temperature range (C) -40 to 125 Power consumption (Typ) (mW) 0.3 Analog voltage AVDD (Min) (V) 2 Analog voltage AVDD (Max) (V) 5.5 INL (Max) (+/-LSB) 0.5 Digital supply (Min) (V) 2 Digital supply (Max) (V) 5.5
Resolution (Bits) 16 Number of input channels 1 Sample rate (Max) (kSPS) 0.86 Interface type I2C Architecture Delta-Sigma Input type Differential, Single-Ended Rating Automotive Reference mode Int Input range (Max) (V) 5.5 Input range (Min) (V) 0 Features Oscillator Operating temperature range (C) -40 to 125 Power consumption (Typ) (mW) 0.3 Analog voltage AVDD (Min) (V) 2 Analog voltage AVDD (Max) (V) 5.5 INL (Max) (+/-LSB) 0.5 Digital supply (Min) (V) 2 Digital supply (Max) (V) 5.5
VSSOP (DGS) 10 9 mm² 3 x 3
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Wide supply range: 2.0 V to 5.5 V
  • Low current consumption:
    • 150 µA (continuous-conversion mode)
  • Programmable data rate:
    • 8 SPS to 860 SPS
  • Single-cycle settling
  • Internal low-drift voltage reference
  • Internal oscillator
  • I2C interface: Four pin-selectable addresses
  • Family of devices:
    • ADS1113-Q1: 1 single-ended or differential input
    • ADS1114-Q1: 1 single-ended or differential input with comparator and PGA
    • ADS1115-Q1: 4 single-ended or 2 differential inputs with comparator and PGA
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Wide supply range: 2.0 V to 5.5 V
  • Low current consumption:
    • 150 µA (continuous-conversion mode)
  • Programmable data rate:
    • 8 SPS to 860 SPS
  • Single-cycle settling
  • Internal low-drift voltage reference
  • Internal oscillator
  • I2C interface: Four pin-selectable addresses
  • Family of devices:
    • ADS1113-Q1: 1 single-ended or differential input
    • ADS1114-Q1: 1 single-ended or differential input with comparator and PGA
    • ADS1115-Q1: 4 single-ended or 2 differential inputs with comparator and PGA

The ADS1113-Q1, ADS1114-Q1, and ADS1115-Q1 devices ( ADS111x-Q1) are precision, low-power, 16-bit, I2C-compatible, analog-to-digital converters (ADCs) offered in VSSOP-10 and UQFN-10 packages. The ADS111x-Q1 devices incorporate a low-drift voltage reference and an oscillator. The ADS1114-Q1 and ADS1115-Q1 also incorporate a programmable gain amplifier (PGA) and a digital comparator. These features, along with a wide operating supply range, make the ADS111x-Q1 well suited for power- and space-constrained, sensor measurement applications.

The ADS111x-Q1 perform conversions at data rates up to 860 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing precise large- and small-signal measurements. The ADS1115-Q1 features an input multiplexer (MUX) that allows two differential or four single-ended input measurements. Use the digital comparator in the ADS1114-Q1 and ADS1115-Q1 for under- and overvoltage detection.

The ADS1113-Q1, ADS1114-Q1, and ADS1115-Q1 devices ( ADS111x-Q1) are precision, low-power, 16-bit, I2C-compatible, analog-to-digital converters (ADCs) offered in VSSOP-10 and UQFN-10 packages. The ADS111x-Q1 devices incorporate a low-drift voltage reference and an oscillator. The ADS1114-Q1 and ADS1115-Q1 also incorporate a programmable gain amplifier (PGA) and a digital comparator. These features, along with a wide operating supply range, make the ADS111x-Q1 well suited for power- and space-constrained, sensor measurement applications.

The ADS111x-Q1 perform conversions at data rates up to 860 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing precise large- and small-signal measurements. The ADS1115-Q1 features an input multiplexer (MUX) that allows two differential or four single-ended input measurements. Use the digital comparator in the ADS1114-Q1 and ADS1115-Q1 for under- and overvoltage detection.

Download

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation model

ADS1013-5, ADS1113-5 IBIS Model

SBAM025.ZIP (19 KB) - IBIS Model
Calculation tool

ADC-INPUT-CALC — Analog-to-digital converter (ADC) input driver design tool supporting multiple input types

ADC-INPUT-CALC is an online tool that provides support for designing the input buffer to an analog-to-digital converter (ADC). It offers 24 different op-amp based buffer circuits that can be used to drive an ADC input. The available topologies cover differential, single-ended and (...)
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
lock = Requires export approval (1 minute)
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
Package Pins Download
VSSOP (DGS) 10 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos