Product details

Sample rate (Max) (MSPS) 1000 Resolution (Bits) 12 Number of input channels 2 Interface type JESD204B Analog input BW (MHz) 1200 Features Ultra High Speed Rating Catalog Input range (Vp-p) 1.9 Power consumption (Typ) (mW) 2700 Architecture Pipeline SNR (dB) 68.4 ENOB (Bits) 11.1 SFDR (dB) 89 Operating temperature range (C) -40 to 85 Input buffer Yes
Sample rate (Max) (MSPS) 1000 Resolution (Bits) 12 Number of input channels 2 Interface type JESD204B Analog input BW (MHz) 1200 Features Ultra High Speed Rating Catalog Input range (Vp-p) 1.9 Power consumption (Typ) (mW) 2700 Architecture Pipeline SNR (dB) 68.4 ENOB (Bits) 11.1 SFDR (dB) 89 Operating temperature range (C) -40 to 85 Input buffer Yes
VQFNP (RMP) 72 100 mm² 10 x 10
  • 12-Bit Resolution, Dual-Channel, 1-GSPS ADC
  • Noise Floor: –157 dBFS/Hz
  • Spectral Performance (fIN = 170 MHz at –1 dBFS):
    • SNR: 67.8 dBFS
    • NSD: –155 dBFS/Hz
    • SFDR: 86 dBc (Including Interleaving Tones)
    • SFDR: 89 dBc (Except HD2, HD3, and Interleaving Tones)
  • Spectral Performance (fIN = 350 MHz at –1 dBFS):
    • SNR: 65.6 dBFS
    • NSD: –152.6 dBFS/Hz
    • SFDR: 75 dBc
    • SFDR: 85 dBc (Except HD2, HD3, and Interleaving Tones)
  • Channel Isolation: 100 dBc at fIN = 170 MHz
  • Input Full-Scale: 1.9 VPP
  • Input Bandwidth (3 dB): 1.2 GHz
  • On-Chip Dither
  • Integrated Wideband DDC Block
  • JESD204B Interface with Subclass 1 Support:
    • 2 Lanes per ADC at 10.0 Gbps
    • 4 Lanes per ADC at 5.0 Gbps
    • Support for Multi-Chip Synchronization
  • Power Dissipation: 1.35 W/Ch at 1 GSPS
  • Package: 72-Pin VQFNP (10 mm × 10 mm)
  • 12-Bit Resolution, Dual-Channel, 1-GSPS ADC
  • Noise Floor: –157 dBFS/Hz
  • Spectral Performance (fIN = 170 MHz at –1 dBFS):
    • SNR: 67.8 dBFS
    • NSD: –155 dBFS/Hz
    • SFDR: 86 dBc (Including Interleaving Tones)
    • SFDR: 89 dBc (Except HD2, HD3, and Interleaving Tones)
  • Spectral Performance (fIN = 350 MHz at –1 dBFS):
    • SNR: 65.6 dBFS
    • NSD: –152.6 dBFS/Hz
    • SFDR: 75 dBc
    • SFDR: 85 dBc (Except HD2, HD3, and Interleaving Tones)
  • Channel Isolation: 100 dBc at fIN = 170 MHz
  • Input Full-Scale: 1.9 VPP
  • Input Bandwidth (3 dB): 1.2 GHz
  • On-Chip Dither
  • Integrated Wideband DDC Block
  • JESD204B Interface with Subclass 1 Support:
    • 2 Lanes per ADC at 10.0 Gbps
    • 4 Lanes per ADC at 5.0 Gbps
    • Support for Multi-Chip Synchronization
  • Power Dissipation: 1.35 W/Ch at 1 GSPS
  • Package: 72-Pin VQFNP (10 mm × 10 mm)

The ADS54J20 is a low-power, wide-bandwidth, 12-bit, 1.0-GSPS, dual-channel, analog-to-digital converter (ADC). Designed for high signal-to-noise ratio (SNR), the device delivers a noise floor of –157 dBFS/Hz for applications aiming for highest dynamic range over a wide instantaneous bandwidth. The device supports the JESD204B serial interface with data rates up to 10 Gbps, supporting two or four lanes per ADC. The buffered analog input provides uniform input impedance across a wide frequency range and minimizes sample-and-hold glitch energy. Optionally, each ADC channel can be connected to a wideband digital down-converter (DDC) block. The ADS54J20 provides excellent spurious-free dynamic range (SFDR) over a large input frequency range with very low power consumption.

The JESD204B interface reduces the number of interface lines, allowing high system integration density. An internal phase-locked loop (PLL) multiplies the ADC sampling clock to derive the bit clock that is used to serialize the 12-bit data from each channel.

The ADS54J20 is a low-power, wide-bandwidth, 12-bit, 1.0-GSPS, dual-channel, analog-to-digital converter (ADC). Designed for high signal-to-noise ratio (SNR), the device delivers a noise floor of –157 dBFS/Hz for applications aiming for highest dynamic range over a wide instantaneous bandwidth. The device supports the JESD204B serial interface with data rates up to 10 Gbps, supporting two or four lanes per ADC. The buffered analog input provides uniform input impedance across a wide frequency range and minimizes sample-and-hold glitch energy. Optionally, each ADC channel can be connected to a wideband digital down-converter (DDC) block. The ADS54J20 provides excellent spurious-free dynamic range (SFDR) over a large input frequency range with very low power consumption.

The JESD204B interface reduces the number of interface lines, allowing high system integration density. An internal phase-locked loop (PLL) multiplies the ADC sampling clock to derive the bit clock that is used to serialize the 12-bit data from each channel.

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet ADS54J20 Dual-Channel, 12-Bit, 1.0-GSPS, Analog-to-Digital Converter datasheet (Rev. B) PDF | HTML 20 Jan 2017
EVM User's guide ADS54J20EVM User's Guide 19 May 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

ADS54J20EVM — ADS54J20 Dual-Channel, 12-Bit, 1.0-GSPS Analog-to-Digital Converter Evaluation Module

The ADS54J20EVM is an evaluation module (EVM) that allows for the evaluation of Texas Instruments’ ADS54J20 and LMK04828 clock jitter cleaner. The ADS54J20 is a low power, 12-bit, 1-GSPS analog to digital converter (ADC) with a buffered analog input and outputs featuring a JESD204B interface. (...)
Not available on TI.com
Firmware

TI-JESD204-IP — JESD204 Rapid Design IP for FPGAs connected to TI high-speed data converters

The JESD204 rapid design IP has been designed to enable FPGA engineers to achieve an accelerated path to a working JESD204 system. The IP has been architected in a way that downstream digital processing and other application logic are isolated from most of the performance- and timing-critical (...)
Support software

DATACONVERTERPRO-SW — High-speed data converter pro software

This high-speed data converter pro GUI is a PC (Windows® XP/7/10 compatible) program designed to aid in evaluation of most TI high-speed data converter and analog front-end (AFE) platforms. Designed to support the entire TSW14xxx series of data-capture and pattern-generation cards, (...)
Simulation model

ADS54J20/40/60 IBIS MODEL ADS54J20/40/60 IBIS MODEL

Simulation model

ADS54J20/40/60 IBIS-AMI Model ADS54J20/40/60 IBIS-AMI Model

Simulation tool

PSPICE-FOR-TI PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins Download
VQFN (RMP) 72 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos